Vermeer
AX19 Brush Chipper
173 hp
Potencia del motor
40.0 gal
Capacidad de combustible
11,199 lb (5,080 kg)
Peso operativo
19.0 in (48.3 cm)
chipping capacity
1,100 rpm
drum speed
36.3 m/min
feed speed
Equivalentes entre marcas
Comparar lado a lado →Máquinas comparables de otros fabricantes, evaluadas sobre especificaciones normalizadas de los fabricantes.
| Modelo | Coincidencia | Potencia del motor | Capacidad de combustible | Peso operativo |
|---|---|---|---|---|
| Bandit Intimidator 18XP | 93% | 174 hp | - | 9,700 lb (4,400 kg) |
| Morbark Eeger Beever 1922 | 93% | 157 hp | 44.0 gal | 10,900 lb (4,944 kg) |
| Morbark BVR19 | 89% | 275 hp | 40.0 gal | 10,501 lb (4,763 kg) |
| Morbark M15R | 87% | 174 hp | 32.0 gal | 13,499 lb (6,123 kg) |
| Bandit 255XP | 86% | 174 hp | - | 8,199 lb (3,719 kg) |
| Bandit Intimidator 15XP | 84% | 174 hp | - | 8,001 lb (3,629 kg) |
Documentos
Especificaciones completas
| Actuation Force | 34 lbs (15.4 kg) | ↗ |
| Actuation Force (BFSB) | 34 lbs (15.4 kg) | ↗ |
| Adjustable Height Discharge Chute | Optional | ↗ |
| Air Cleaner | 2 Stage Dry | ↗ |
| Alternator | 90 | ↗ |
| Auto Reverse PSI | 2800 psi | ↗ |
| Axle/Suspension | Tandem Torsion 7000 lb capacity | ↗ |
| Battery | 950 CCA | ↗ |
| Bedknife - Number of Useable Edges | 4 | ↗ |
| Bedknife Material | 1018 CD | ↗ |
| Bedknife Size | 3" x 20.25" | ↗ |
| Bedknife Thickness | 1.3 in (33.0 mm) | ↗ |
| Belt Idler/Tensioner | Spring loaded | ↗ |
| Belt Type | 5 V | ↗ |
| Bore | 2.5 in (63.5 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | 11 GA | ↗ |
| Bottom Thickness | .1 in | ↗ |
| Brake Type | Electric | ↗ |
| Capacity - Option One | 14,000 (Tandem 7,000 lbs) | ↗ |
| Chute Height | 108 in (274 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Manual Lever | ↗ |
| Clutch Type | 12" Spring Loaded | ↗ |
| Controller | Vermeer ACS: C248 | ↗ |
| Coolant Capacity (Engine and Radiator) | 32 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 36 in (91.4 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | MFD | ↗ |
| Distance from Feed Table to Ground | 30.3 in (77.0 cm) | ↗ |
| Dynamic Capacity | 31,400 lbs (14,243 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 26" Suction | ↗ |
| Feed Roller Clamp Load | 4,000 lbs (1,814 kg) | ↗ |
| Feed Roller Clamp Type | Hydraulic | ↗ |
| Feed Roller Dimension | 19" dia x 28.25 length | ↗ |
| Feed Roller Dimension (Two) | 11" dia x 28.25 length | ↗ |
| Feed Roller Minimum Distance to Drum | 5 in (12.7 cm) | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Speed | 119 ft/min | ↗ |
| Fender Description | Bolt-on | ↗ |
| Filtration Method | 6 micron return, 100 micron suction | ↗ |
| Fixture Method | Weld-on | ↗ |
| Flow Control | No | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | 7.5" Z-Channel x 0.25" Thick | ↗ |
| Fuel Tank Capacity | 40 gal | ↗ |
| Fuel Type | Diesel | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 173 hp | ↗ |
| Height | 108 in (274 cm) | ↗ |
| Hitch Type | Pintle | ↗ |
| Hydraulic Chute Controls | Standard | ↗ |
| Hydraulic Outriggers | Optional (Manual only) | ↗ |
| Infeed Hopper Height | 35 in (88.9 cm) | ↗ |
| Infeed Table Length | 60.5 in (154 cm) | ↗ |
| Infeed Table Material Thickness | .3 in | ↗ |
Cada valor se rastrea hasta los datos publicados por el fabricante. ↗ abre la fuente.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
¿Es su equipo? Verifique sus specs →