Vermeer
BC1000XL Gas Brush Chipper
89 hp
Potencia del motor
20.0 gal
Capacidad de combustible
4,680 lb (2,123 kg)
Peso operativo
12.0 in (30.5 cm)
chipping capacity
101 in (256 cm)
discharge height
20 in (50.8 cm)
drum diameter
Equivalentes entre marcas
Comparar lado a lado →Máquinas comparables de otros fabricantes, evaluadas sobre especificaciones normalizadas de los fabricantes.
| Modelo | Coincidencia | Potencia del motor | Capacidad de combustible | Peso operativo |
|---|---|---|---|---|
| Bandit 200UC | 91% | 84 hp | - | 4,799 lb (2,177 kg) |
| Bandit 2890 | 91% | - | - | 5,320 lb (2,413 kg) |
| Bandit Intimidator 12XC | 84% | 62 hp | - | 4,601 lb (2,087 kg) |
| Morbark M12R | 83% | - | 24.5 gal | 5,501 lb (2,495 kg) |
| Bandit Intimidator 12XPC | 82% | 67 hp | - | 5,300 lb (2,404 kg) |
| Morbark Eeger Beever 1415 | 82% | 108 hp | 24.5 gal | - |
Documentos
Especificaciones completas
| Actuation Force | 34 lbs (15.4 kg) | ↗ |
| Actuation Force (BFSB) | 34 lbs (15.4 kg) | ↗ |
| Air Cleaner | 2-stage dry with safety element | ↗ |
| Air Flow | 580 cfm | ↗ |
| Alternator | 95 amps | ↗ |
| Axle/Suspension | Torsion | ↗ |
| Axle/Suspension - Option Two | Torsion | ↗ |
| Battery | Group 24; 580 CCA | ↗ |
| Bedknife - Number of Useable Edges | 4 | ↗ |
| Bedknife Material | 1018 | ↗ |
| Bedknife Size | 3.5 " x 17.3 " (8.9 cm x 43.8 cm) | ↗ |
| Bedknife Thickness | 1 in (25.4 mm) | ↗ |
| Belt Idler/Tensioner | Yes | ↗ |
| Belt Type | 5 V | ↗ |
| Bore | 2.4 in (61.0 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | 11 GA | ↗ |
| Brake Type | Standard electric or optional hydraulic | ↗ |
| Capacity - Option One | 5200 lb (2358.7 kg) | ↗ |
| Capacity - Option Two | 7000 lb (3175.2 kg) | ↗ |
| Chute Height | 101 in (257 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Belt tensioner | ↗ |
| Clutch Type | Clutchless PTO | ↗ |
| Controller | Vermeer ACS | ↗ |
| Coolant Capacity (Engine and Radiator) | 5.5 gal | ↗ |
| Cooling Medium | Liquid cooled | ↗ |
| Deluxe Gauges | Standard | ↗ |
| Diameter | 20 in (50.8 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | In countries that drive on the left side of the road versus the right side of the road, moving these controls over to the left side moves the operator off of the traffic side of the road. | ↗ |
| Distance from Feed Table to Ground | 26 in (66.0 cm) | ↗ |
| Dynamic Capacity | 31,400 lbs (14,243 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 18.75 -in suction | ↗ |
| Feed Roller Clamp Load | 350 lbs (159 kg) | ↗ |
| Feed Roller Dimension | 20 " x 17 " (50.8 cm x 43.2 cm) | ↗ |
| Feed Roller Minimum Distance to Drum | 1 in (25.4 mm) | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Speed | 118 ft/min | ↗ |
| Fender Description | Bolt-on steel | ↗ |
| Filtration Method | 10 micron return; 100 micron suction | ↗ |
| Fixture Method | Weld-on | ↗ |
| Flow Control | No | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness | ↗ |
| Fuel Tank Capacity | 20 gal | ↗ |
| Fuel Type | Unleaded and E10 gasoline | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 72.4 hp | ↗ |
| Height | 101 in (257 cm) | ↗ |
| Hitch Type | Pintle | ↗ |
| Infeed Hopper Height | 12 in (30.5 cm) | ↗ |
| Infeed Table Length | 32 in (81.3 cm) | ↗ |
| Infeed Table Material Thickness | .2 in | ↗ |
| Infeed Table Width | 52 in (132 cm) | ↗ |
| Infeed Throat Capacity | 12 " x 17.5 " (30.5 cm x 43.2 cm) | ↗ |
| Knife Size | 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) | ↗ |
| Knife Thickness | .6 in | ↗ |
Cada valor se rastrea hasta los datos publicados por el fabricante. ↗ abre la fuente.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
¿Es su equipo? Verifique sus specs →