Vermeer
BC1500 Brush Chipper
130 hp
Potencia del motor
50.0 gal
Capacidad de combustible
7,319 lb (3,320 kg)
Peso operativo
15 in (38.1 cm)
chipping capacity
2,050 rpm
drum speed
170.3 L
fuel tank capacity
Equivalentes entre marcas
Comparar lado a lado →Máquinas comparables de otros fabricantes, evaluadas sobre especificaciones normalizadas de los fabricantes.
| Modelo | Coincidencia | Potencia del motor | Capacidad de combustible | Peso operativo |
|---|---|---|---|---|
| Bandit Intimidator 15XP | 89% | 174 hp | - | 8,001 lb (3,629 kg) |
| Bandit 255XP | 88% | 174 hp | - | 8,199 lb (3,719 kg) |
| Bandit Intimidator 12XP | 86% | 145 hp | - | 6,499 lb (2,948 kg) |
| Bandit 250XP | 83% | 174 hp | - | 6,799 lb (3,084 kg) |
| Bandit 200XP | 82% | 145 hp | - | 5,501 lb (2,495 kg) |
| Morbark M20R | 81% | - | 58.0 gal | - |
Documentos
Especificaciones completas
| Actuation Force | 34 lbs (15.4 kg) | ↗ |
| Actuation Force (BFSB) | 34 lbs (15.4 kg) | ↗ |
| Air Cleaner | 2 -stage dry | ↗ |
| Air Flow | 4600 cfm | ↗ |
| Alternator | 70 Amp | ↗ |
| Auto Reverse PSI | 2650 psi | ↗ |
| Axle/Suspension | Torsion | ↗ |
| Battery | 950 | ↗ |
| Bedknife - Number of Useable Edges | 2 | ↗ |
| Bedknife Material | HRLC steel | ↗ |
| Bedknife Size | 2.5" (6.4 cm) | ↗ |
| Bedknife Thickness | 1.5 in (38.1 mm) | ↗ |
| Belt Idler/Tensioner | Spring-loaded | ↗ |
| Belt Type | 5 V | ↗ |
| Bore | 2.4 in (61.0 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | 11 GA | ↗ |
| Bottom Thickness | .1 in | ↗ |
| Brake Type | Electric | ↗ |
| Capacity - Option One | 8000 lb (3628.7 kg) | ↗ |
| Chute Height | 104 in (264 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Manual lever | ↗ |
| Clutch Type | 13-in spring-loaded clutch | ↗ |
| Controller | Vermeer ACS | ↗ |
| Coolant Capacity (Engine and Radiator) | 5 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 22.5 in (57.1 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | Multifunction Display (MFD) | ↗ |
| Distance from Feed Table to Ground | 27.2 in (69.1 cm) | ↗ |
| Dynamic Capacity | 31,400 lbs (14,243 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 18.7 suction | ↗ |
| Feed Roller Clamp Load | 300 lbs (136 kg) | ↗ |
| Feed Roller Clamp Type | Spring | ↗ |
| Feed Roller Dimension | 20.9" (53.1 cm) diameter | ↗ |
| Feed Roller Minimum Distance to Drum | 1.3 in (33.0 mm) | ↗ |
| Feed Roller Orientation | Vertical | ↗ |
| Feed Speed | 122 ft/min | ↗ |
| Fender Description | Bolt-on | ↗ |
| Filtration Method | 3 micron return, 100 micron suction | ↗ |
| Fixture Method | Weld-on | ↗ |
| Flow Control | Yes | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | .25" (6 mm) Z channel, 7" (17.8 cm) | ↗ |
| Fuel Tank Capacity | 50 gal | ↗ |
| Fuel Type | Gasoline | ↗ |
| Green Hold to Run Button | Standard (one on each side) | ↗ |
| Gross Horsepower (Maximum) | 172 hp | ↗ |
| Height | 104 in (264 cm) | ↗ |
| Hitch Type | Pintle | ↗ |
| Horsepower Options | Cummins QSF3.8L T4F - 130 hp | ↗ |
| Hydraulic Chute Controls | Optional | ↗ |
| Infeed Hopper Height | 32 in (81.3 cm) | ↗ |
| Infeed Table Length | 30.1 in (76.5 cm) | ↗ |
| Infeed Table Material Thickness | .2 in | ↗ |
| Infeed Table Width | 55.4 in (141 cm) | ↗ |
Cada valor se rastrea hasta los datos publicados por el fabricante. ↗ abre la fuente.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
¿Es su equipo? Verifique sus specs →