Ir al contenido
Catálogo
Vermeer

PD5 Pile Driver

49 hp
Potencia del motor
10,351 lb (4,695 kg)
Peso operativo
0 rubber tracks
drive type
94.6 L
fuel tank capacity
4.2 km/h
ground drive speed
850 joules
hammer energy class

Equivalentes entre marcas

Comparar lado a lado →

Máquinas comparables de otros fabricantes, evaluadas sobre especificaciones normalizadas de los fabricantes.

ModeloCoincidenciaPotencia del motorPeso operativodrive type
XCMG XE600DP 10% 376 hp130,073 lb (59,000 kg)-

Documentos

Datasheet ↓
Archive ✓ Verified fuente Jul 2026

Especificaciones completas

Battery CCA Rating950
Battery Group Class31
ControlsMachine-integrated
Cooling MediumLiquid
EPA Certification FamilyTier 3 (Stage IIIA CA)
Engine crankcase with filter2.5 gal
Fuel Tank25 gal
Fuel TypeDiesel
Gross Horsepower60 hp
Hydraulic Tank35 gal
Hydraulic pump typeParker PGP315 Gear
Impact drive typeHigh-frequency hammer
Laser receiverOptional
Make and ModelCAT C2.2T
MastHammer pull-down
Mast height15 ft (4.6 m)
Maximum Hammer Energy950 Joules
Maximum Transport Speed2.4 mph
Maximum angle (direction of travel)10 deg
Maximum angle (perpendicular to travel)10 deg
Maximum hammer impact1500 bpm
Maximum operating height19.6 ft (6.0 m)
Maximum pile dimension (round - large opening)9.3 in (23.6 cm)
Maximum pile dimension (square - large opening)8.3 in (21.1 cm)
Maximum pile height15.5 ft (4.7 m)
Number of Cylinders4
Operating length110 in (280 cm)
Operating weight10,380 lbs (4,708 kg)
Operating width150 in (381 cm)
Rotating platformStandard
TelematicsStandard
Track driveRubber tracks
Track width84 in (213 cm)
Transport Height98.4 in (250 cm)
Transport Length140 in (357 cm)
Transport Width87 in (221 cm)
Transport width with track shield folded up87 in (221 cm)
Voltage12 volts

Cada valor se rastrea hasta los datos publicados por el fabricante. ↗ abre la fuente.

Export for Heyquip

Populate your Heyquip store's product page with this model's specs, images, and cited documents.

¿Es su equipo? Verifique sus specs →

Fuentes

← Todos los Post Driver

Admin Open in admin →

Fix classification