Vermeer
SC30TX Stump Cutter
25 hp
Potencia del motor
6.8 gal
Capacidad de combustible
1,550 lb (703 kg)
Peso operativo
12.0 in (30.5 cm)
cutting depth
25.7 L
fuel tank capacity
23.4 kPa
ground bearing pressure
Equivalentes entre marcas
Comparar lado a lado →Máquinas comparables de otros fabricantes, evaluadas sobre especificaciones normalizadas de los fabricantes.
| Modelo | Coincidencia | Potencia del motor | Capacidad de combustible | Peso operativo |
|---|---|---|---|---|
| Toro STX-26 Stump Grinder | 87% | 26 hp | - | 1,199 lb (544 kg) |
| Bandit SG-40 | 85% | 40 hp | - | 1,499 lb (680 kg) |
| Toro STX-38 Stump Grinder | 77% | 38 hp | - | 1,750 lb (794 kg) |
| Bandit Model 2550 (Rubber Tire) | 70% | 49 hp | - | 2,280 lb (1,034 kg) |
| Bandit Model 2550 (Track) | 68% | 49 hp | - | 2,560 lb (1,161 kg) |
| Bandit SG-75W | 35% | 74 hp | - | 4,321 lb (1,960 kg) |
Documentos
Especificaciones completas
| Air Cleaner | 6 " (15.2 cm) 2-Stage dry | ↗ |
| Battery | 405 | ↗ |
| Chip Containment | 2.2 cu ft | ↗ |
| Control Station Description | Fixed-rear | ↗ |
| Controller | Yes | ↗ |
| Cooling Medium | Air/oil | ↗ |
| Cutterwheel Cut Above Ground | 25 in (63.5 cm) | ↗ |
| Cutterwheel Cut Below Ground | 12 in (30.5 cm) | ↗ |
| Cutterwheel Diameter | 16 in (40.6 cm) | ↗ |
| Cutterwheel Guard | Yes | ↗ |
| Cutterwheel Speed | 1110 rpm | ↗ |
| Cutterwheel Straight Line Dimension | 35.5 in (90.2 cm) | ↗ |
| Cutterwheel Thickness | .5 in | ↗ |
| Directional Control | Standard | ↗ |
| Extended Warranty | Per request | ↗ |
| Filtration Method | Inline return filter | ↗ |
| Flow Control | Autosweep (option) | ↗ |
| Fuel Tank Capacity | 6.8 gal | ↗ |
| Fuel Type | Gas | ↗ |
| Gross Horsepower (Maximum) | 25 hp | ↗ |
| Ground Bearing Pressure - Soft Ground | 3.4 psi | ↗ |
| Height | 49 in (124 cm) | ↗ |
| High Speed Travel | 3.2 mph | ↗ |
| Length | 94 in (239 cm) | ↗ |
| Lower Gearbox | Hydraulic motor | ↗ |
| Make and Model | Kohler ECH740 | ↗ |
| Max Fuel Consumption | 2.4 gph | ↗ |
| Maximum Angle of Continuous Operation | 25 deg | ↗ |
| Number of Cylinders | 2 | ↗ |
| Number of Idlers | 5 | ↗ |
| Number of Indexes | 2 | ↗ |
| Number of Pockets | 16 | ↗ |
| Number of Teeth | 20 | ↗ |
| Oil Cooler | Yes. Fan-cooled | ↗ |
| Oil Filter | Spin-on | ↗ |
| Oil Volume with Filter | 2 qt | ↗ |
| Preventive Maintenance | Per request | ↗ |
| Pump Flow at Maximum RPM | 11.4 gpm (43.1 L/min) | ↗ |
| Recommended Oil | Kohler oil or API CH4/SJ | ↗ |
| Recommended Oil Type | ISO 68 | ↗ |
| Reversible Pockets/Teeth | Yes | ↗ |
| Special Paint | Per request | ↗ |
| Standard Gauges | Hour meter/tach | ↗ |
| Switches | Cutter wheel drive | ↗ |
| System Relief Pressure | 2900 psi (200 bar) | ↗ |
| System Type | Open loop | ↗ |
| System Voltage | 12 | ↗ |
| Tank capacity | 9 gal | ↗ |
| Tooth Description | Yellow Jacket Cutter System | ↗ |
| Torque (Max) | 42 ft-lb | ↗ |
| Track Brake Type | Hydrostatic | ↗ |
| Track Drive Motor Type | Geroter | ↗ |
| Track Drive Pump Type | Hydrostatic | ↗ |
| Track Length on Ground | 31.4 " (79.7 cm) | ↗ |
| Track Type | Rubber 7 " (17.8 cm) width | ↗ |
| Track Width - Extended | 35 " (88.9 cm) | ↗ |
| Track Width - Retracted | 35 " (88.9 cm) | ↗ |
| Type of Idler | Cast | ↗ |
| Weight - Engine Option One | 1,550 lbs (703 kg) | ↗ |
| Width | 35 in (88.9 cm) | ↗ |
Cada valor se rastrea hasta los datos publicados por el fabricante. ↗ abre la fuente.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
¿Es su equipo? Verifique sus specs →