6-8 ft Step Ladder
The 6-8 ft Step Ladder class represents the most common size for residential interior work, with 6 ft models serving as the industry standard for 8-9 ft ceilings, trim installation, and fixture work. This size spans self-supporting A-frame ladders that provide working heights of approximately 10-12 ft when standing on the second step from the top. Within the Step Ladder classification, this band sits between the Up to 6 ft Step Ladder for compact tasks and the 8-12 ft Step Ladder for commercial ceiling heights.
Cat classes
Choisissez une classe de taille — la capacité et la portée varient selon la gamme.
Spécifications clés
| Spécification | Plage typique | Signification |
|---|---|---|
| Load capacity | 661–827 lb (300–375 kg) | Type IA and Type IAA duty ratings support trades carrying tools and materials |
| Max height | 6–7 ft (1.8–2.1 m) | Platform height of the top step; working reach extends approximately 4 ft higher |
| Working reach | 10–12 ft (3.0–3.7 m) | Approximate ceiling height accessible when standing on the second step from top |
Comment choisir
The 6-8 ft Step Ladder class is the correct choice for standard residential ceiling work between 8-9 ft, interior painting, light fixture installation, and cabinet-height trim. For work below 8 ft ceilings, tight closets, or attic access, the Up to 6 ft Step Ladder offers better maneuverability in confined spaces. When ceiling heights exceed 9 ft, commercial drop ceilings are involved, or second-story exterior work is required, the 8-12 ft Step Ladder provides the necessary working reach without overextending from a smaller ladder.
Ce que cette taille peut gérer
- Installing recessed lighting or ceiling fans in 8-9 ft residential ceilings
- Painting walls and ceilings in single-story homes and apartments
- Crown molding and trim installation at standard ceiling heights
- Changing smoke detectors and light bulbs in foyers and living rooms
- Shelving and cabinet installation up to 10 ft finished height
- HVAC filter access and ductwork inspection in residential spaces
Sécurité et opération
- Maintain three points of contact when climbing; top two steps typically marked as non-standing platform
- Set up on level, firm surface with spreader bars fully locked before ascending
- Type IA (450 lb) and Type IAA (375 lb) ratings include combined weight of user, tools, and materials
- Indoor use standard; outdoor work requires securing against wind and uneven ground conditions
Transport et logistique
- Fits upright or flat in full-size pickup beds and cargo vans without projection
- Weighs 10-20 kg; single-person carry through doorways and hallways typical
- Fiberglass models approximately 30% heavier than aluminum equivalents
Alimentation
- No power or fuel requirements; self-supporting mechanical equipment
- Fiberglass construction provides non-conductive properties for electrical work
- Work platform accommodates cordless tool batteries and small material loads
Questions fréquentes
What ceiling height does a 6 ft step ladder reach?
What is the difference between Type IA and Type II step ladders in this size?
When is fiberglass specified instead of aluminum for 6-8 ft step ladders?
Comparer les modèles populaires
Chercher par spécification →Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.
| Modèle | Hauteur max | Capacité de charge |
|---|---|---|
| Louisville Ladder AL2240MG-2 | 7 ft (2.1 m) | 827 lb (375 kg) |
| Louisville Ladder AL2240MG-1 | 7 ft (2.1 m) | 827 lb (375 kg) |
| Louisville Ladder AL3040MG-R10FT-1 | 7 ft (2.1 m) | 827 lb (375 kg) |
| Louisville Ladder FS1507 | 7 ft (2.1 m) | 661 lb (300 kg) |
| Louisville Ladder FT1506-1 | 6 ft (1.8 m) | 661 lb (300 kg) |
| Louisville Ladder AL2240MG | 7 ft (2.1 m) | 827 lb (375 kg) |
Équipements connexes
Parcourir par fabricant
Sources
Chaque spécification est vérifiée par rapport aux données publiées par le fabricant, avec la source liée pour référence.
6-8 ft Step Ladder
71 modèles · Page 2 sur 2 · Chaque spécification citée à la source
