CAT CLASS: HQ-10910

2,000-6,000 gal Water Tank

The 2,000-6,000 gal water tank class provides bulk site water storage for feeding water trucks or supporting comprehensive dust-control programs across large construction, grading, or mining sites. This is the largest common portable water tank size in the industry fleet, positioned above the 500-2,000 gal Water Tank class. These tanks typically stand 12.5-15 ft tall and carry load capacities from 2,000 to 5,000 kg when filled.

521

Modèles

Marques

Cat classes

Choisissez une classe de taille — la capacité et la portée varient selon la gamme.

Spécifications clés

Spécification	Plage typique	Signification
Capacity	2,000–6,000 gal	Defines the total volume of water stored; sufficient to supply multiple water truck fills or a day of continuous dust suppression
Max height	12.5–15 ft (3.8–4.6 m)	Vertical clearance required for siting and filling; affects gravity-fed discharge pressure
Load capacity	4,409–11,023 lb (2,000–5,000 kg)	Maximum safe weight of water and contents; critical for foundation and transport planning

Comment choisir

The 2,000-6,000 gal band suits operations requiring bulk storage to feed water trucks, support extended dust-control spraying, or maintain water supply across multi-acre sites where refilling frequency must be minimized. When the primary need is stationary point-of-use storage—hydro-seeding prep, concrete curing, or single-equipment water supply—the 500-2,000 gal Water Tank band offers easier placement and lower foundation demands. Sites with municipal water connections or frequent delivery access often find the intermediate size adequate, while remote or high-volume operations benefit from the reduced refill cycles this larger class provides.

Ce que cette taille peut gérer

Supplying a water truck fleet on a 40-acre grading project with infrequent municipal access
Central water storage for a dust-control program spanning multiple demolition zones
Remote earthwork site requiring multi-day water reserves between tanker deliveries
Large-scale concrete pour staging where mixer trucks draw from a common supply
Mining haul-road watering where refill logistics are constrained by distance
Temporary water supply for fire protection or emergency reserves on industrial construction

Sécurité et opération

Site surface must be level and stable; uneven settlement can stress tank walls and compromise structural integrity
Overfill protection or manual monitoring required; tanks lack integral overflow systems in most industry configurations
Secure lid closures to prevent debris entry and reduce algae growth; potable-rated tanks may require NSF-certified materials if supplying drinking water
Freezing conditions require draining or heating provisions; ice expansion can rupture polyethylene and steel tanks alike

Transport et logistique

Delivered and placed by flatbed truck or lowboy trailer; empty tanks weigh 200-800 lbs depending on construction material
Larger units in this class may require crane or forklift offloading; smaller polyethylene models can be maneuvered with skid-steer forks
Filled tanks are stationary; site foundations must support 2,000-5,000 kg distributed load on level, compacted ground or engineered pads

Alimentation

Tanks are passive storage vessels requiring no onboard power; filling via municipal connection, water truck, or tanker delivery
Discharge by gravity (elevation-dependent pressure), external electric pump, or truck-mounted pump drawing from tank outlet
Pumps feeding from these tanks typically run on 115V or 230V single-phase electric, or gasoline/diesel portable power

Questions fréquentes

What foundation is required for a 5,000-gallon water tank?

A level, compacted gravel pad or concrete slab capable of supporting 4,000-5,000 kg distributed load is typical. Uneven ground or soft soil risks tank deformation and discharge-valve misalignment.

How long does it take to fill a 3,000-gallon tank?

Fill time depends on source flow rate: a municipal hydrant at 100 GPM fills a 3,000-gallon tank in approximately 30 minutes, while a water truck at 50 GPM requires roughly an hour.

Can these tanks gravity-feed a water truck?

Yes, if the tank outlet is elevated above the truck fill point and the vertical drop provides sufficient pressure. Many sites use a booster pump to accelerate transfer rates or overcome elevation deficits.

Comparer les modèles populaires

Chercher par spécification →

Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.

Modèle	Capacité de charge	Hauteur max
Den Hartog ACT2000-LPB	2,000 gal	13.2 ft (4.0 m)
Den Hartog ACT2000-LPG	2,000 gal	13.2 ft (4.0 m)
Den Hartog ACT2500-LPB	2,500 gal	13.2 ft (4.0 m)
Den Hartog ACT2500-LPG	2,500 gal	13.2 ft (4.0 m)
Norwesco Below Ground Holding Tank 5025 gal	5,025 gal	17.6 ft (5.4 m)
Norwesco Specialty Flat Bottom Hauling Tank 4200 gal	4,200 gal	15 ft (4.6 m)