Catalogue / Comparer
Comparer l’équipement
Côte à côte, normalisé aux mêmes unités, chaque valeur retracée jusqu’aux données du fabricant.
| Vermeer Vermeer BP8000 Brush Chipper | Bandit Bandit 200UC Brush Chipper | Morbark Morbark BVR10 Brush Chipper | Morbark Morbark D76SP Brush Chipper | |
|---|---|---|---|---|
| Poids en service | 3,739 lb (1,696 kg) | 4,799 lb (2,177 kg) | 4,400 lb (1,996 kg) | 3,680 lb (1,669 kg) |
| Débit | 10 gpm | - | - | - |
| Capacité de carburant | - | - | 17.0 gal | 10.0 gal |
| Puissance moteur | 85 hp | 84 hp | 74 hp | 62 hp |
| Axle capacity | - | 6,001 lb (2,722 kg) | - | - |
| Boom arc swing | - | - | - | 76 in (193 cm) |
| Chipping capacity | - | 12 in (30.5 cm) | 10 in (25.4 cm) | - |
| Cutter wheel speed | - | - | - | 1,200 RPM |
| Cutting capacity | - | 12.0 in (30.5 cm) | - | - |
| Disc diameter | - | 40.2 in (102 cm) | - | - |
| Drum width | - | - | 16.5 in (42 cm) | - |
| Feed rate | - | 120 ft/min | - | - |
| Fuel tank capacity | - | 92.7 L | - | - |
| Hydraulic capacity | - | - | 26.5 L | - |
| Hydraulic oil capacity | - | - | - | 30 gallons |
| Hydraulic pressure | 2,000 psi | - | - | - |
| Hydraulic tank capacity | - | 45.4 L | - | - |
| Infeed opening width | - | - | 59.8 in (152 cm) | - |
| Length forks down | 197 in (500 cm) | - | - | - |
| Lift capacity | 2,500 lbs (1,134 kg) | - | - | - |
| Max travel speed | - | - | - | 2.8 MPH |
| Throat opening height | - | - | 14.2 in (36 cm) | - |
| Width | 108 in (274 cm) | - | - | - |
Normalisé aux mêmes unités. Un tiret signifie que la valeur n'a pas été publiée.