Takeuchi
TB230
9 ft (2.7 m)
Profondeur d’excavation max
15 ft (4.6 m)
Portée max
14,021 lb (6,360 kg)
Poids en service
Équivalents entre marques
Comparer côte à côte →Machines comparables d’autres fabricants, évaluées sur des spécifications normalisées provenant des fabricants.
| Modèle | Correspondance | Profondeur d’excavation max | Portée max | Poids en service |
|---|---|---|---|---|
| New Holland E60C | 87% | 11 ft (3.4 m) | - | 12,939 lb (5,869 kg) |
| Caterpillar 306 CR | 86% | - | 20.7 ft (6.3 m) | 13,911 lb (6,310 kg) |
| Develon DX55R-7 | 86% | 11 ft (3.4 m) | - | 12,655 lb (5,740 kg) |
| Develon DX62R-7 | 86% | 12 ft (3.7 m) | - | 13,704 lb (6,216 kg) |
| Develon DX63-7 | 86% | 12 ft (3.7 m) | - | 13,708 lb (6,218 kg) |
| Case CX60C | 85% | 11.7 ft (3.6 m) | - | 12,941 lb (5,870 kg) |
Documents
Spécifications complètes
| ENGINE - Displacement | 81.0 (1.3 L) cu in | ↗ |
| ENGINE - Horsepower @ 2,400 rpm | 24.4 (18.2 kW) hp | ↗ |
| ENGINE - Make / Model | Yanmar / 3TNV88F | ↗ |
| ENGINE - Maximum Torque @ 1,440 rpm | 63.0 (85.4 Nm) ft-lb | ↗ |
| FLUID CAPACITIES - Cooling System | 4.2 (4.0 L) qt | ↗ |
| FLUID CAPACITIES - Engine Lubrication | 5.0 (4.7 L) qt | ↗ |
| FLUID CAPACITIES - Fuel Consumption (65% of Full Load) | 0.8 (3.3 L / hr) gal / hr | ↗ |
| FLUID CAPACITIES - Fuel Tank Capacity | 12.2 (46.0 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic Reservoir Capacity | 9.2 (35.0 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic System Capacity | 14.8 (56.0 L) gal | ↗ |
| HYDRAULIC SYSTEM - Auxiliary Flow - Primary Circuit | 13.4 (50.6 L /min) gpm | ↗ |
| HYDRAULIC SYSTEM - Total Hydraulic Flow | 24.2 (91.6 L / min) gpm | ↗ |
| Hydraulic System Pressure | 3,046 (21.0 MPa) psi | ↗ |
| MACHINE DIMENSIONS - Front Swing Radius | 6 (1,895 mm) ft 2.7 in | ↗ |
| MACHINE DIMENSIONS - Front Swing Radius with Boom Offset | 4 (1,505 mm) ft 11.2 in | ↗ |
| MACHINE DIMENSIONS - Ground Clearance | 11.9 (305 mm) in | ↗ |
| MACHINE DIMENSIONS - Maximum Dig Height | 14 (4,450 mm) ft 7.0 in | ↗ |
| MACHINE DIMENSIONS - Maximum Digging Depth | 9 (2,835 mm) ft 3.6 in | ↗ |
| MACHINE DIMENSIONS - Maximum Dumping Height | 10 (3,230 mm) ft 7.2 in | ↗ |
| MACHINE DIMENSIONS - Maximum Reach | 15 (4,850 mm) ft 10.9 in | ↗ |
| MACHINE DIMENSIONS - Maximum Reach at Ground Level | 15 4,710 mm ft 5.4 in | ↗ |
| MACHINE DIMENSIONS - Maximum Vertical Digging Depth | 7 (2,153 mm) ft 0.8 in | ↗ |
| MACHINE DIMENSIONS - Tail Swing (Slew) Radius | 4 (1,330 mm) ft 4.4 in | ↗ |
| MACHINE DIMENSIONS - Track Width (Rubber) | 11.8 (300 mm) in | ↗ |
| MACHINE DIMENSIONS - Transport Height | 8 (2,540 mm) ft 3.9 in | ↗ |
| MACHINE DIMENSIONS - Transport Length | 15 (4,595 mm) ft 0.9 in | ↗ |
| MACHINE DIMENSIONS - Undercarriage Length | 6 (1,900 mm) ft 2.9 in | ↗ |
| MACHINE DIMENSIONS - Undercarriage Width | 4 (1,460 mm) ft 9.5 in | ↗ |
| OPERATING PERFORMANCE - Arm Length | 4 (1,445 mm) ft 9.0 in | ↗ |
| OPERATING PERFORMANCE - Ground Pressure | 4.3 (29.6 kPa) psi | ↗ |
| OPERATING PERFORMANCE - Maximum Arm Digging Force | 2,900 (1,325 kg) lb | ↗ |
| OPERATING PERFORMANCE - Maximum Bucket Breakout Force | 6,471 (2,935 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Weight | 6,360 (2,885 kg) lb | ↗ |
| OPERATING PERFORMANCE - Slew Speed | 10.3 rpm | ↗ |
| OPERATING PERFORMANCE - Traction Force | 6,340 (2,876 kg) lb | ↗ |
| OPERATING PERFORMANCE - Travel Speed - High | 3.2 (5.2 km / hr) mph | ↗ |
| OPERATING PERFORMANCE - Travel Speed - Low | 1.8 (2.9 km / hr) mph | ↗ |
Chaque valeur est retracée jusqu’aux données publiées par le fabricant. ↗ ouvre la source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
C’est votre équipement ? Vérifiez vos specs →