Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Bandit Bandit 65XP Brush Chipper | Morbark Morbark TW 230VTR Brush Chipper | Morbark Morbark TW 230HB Brush Chipper | Vermeer Vermeer BC600XL Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 2,000 lb (907 kg) | 2,584 lb (1,172 kg) | 1,565 lb (710 kg) | 1,900 lb (862 kg) |
| Fuel capacity | - | 9.0 gal | 4.8 gal | - |
| Engine power | 37 hp | 37 hp | 37 hp | 27 hp |
| Airflow cfm | - | - | - | 880 cfm |
| Chipper capacity | 6 in (15.2 cm) | - | - | - |
| Chipping capacity | 6 in (15.2 cm) | 6 in (15.2 cm) | 6.2 in (15.7 cm) | - |
| Drum diameter | - | - | - | 24.0 in (61 cm) |
| Drum speed | - | - | - | 1,835 rpm |
| Dump box capacity | 8.5 cubic yards | - | - | - |
| Feed rate | 80 fpm | - | - | - |
| Fuel tank capacity | 8 gallons | - | 18 L | - |
| Fuel type | - | - | - | 0 Gas |
| Height | - | - | 7.2 ft (2.2 m) | - |
| Hydraulic flow | 6 gpm | - | - | - |
| Hydraulic tank capacity | 7 gallons | - | - | - |
| Length tray down | - | - | 11.5 ft (3.5 m) | - |
| Material capacity | - | - | - | 6.0 in (15.2 cm) |
| Max diameter infeed | - | - | 6.3 in (160 mm) | - |
| System relief pressure | - | - | - | 172.4 bar |
| Width | - | - | 4.9 ft (1.5 m) | - |
Normalised to the same units. A dash means the figure was not published.