Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Morbark Morbark 1000 Brush Chipper | Vermeer Vermeer S650TX Brush Chipper | Vermeer Vermeer S925TX Brush Chipper | Vermeer Vermeer BC900XL Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 2,650 lb (1,202 kg) | 2,690 lb (1,220 kg) | 3,596 lb (1,631 kg) | 3,060 lb (1,388 kg) |
| Engine power | 15 hp | 25 hp | 25 hp | 35 hp |
| Boom swing | 360 degrees | - | - | - |
| Cutting capacity | - | - | - | 9.0 in (22.9 cm) |
| Disc speed | - | - | - | 1,500 rpm |
| Fuel tank capacity | - | 54.9 L | 49.2 L | 60.6 L |
| Ground pressure | - | - | 0.4 bar | - |
| Hinge pin height | - | - | 85.7 in (218 cm) | - |
| Hydraulic reservoir capacity | 25 gallon | - | - | - |
| Hydraulic system flow | - | 51.1 L/min | 45.4 L/min | - |
| Infeed table width | - | - | - | 48.0 in (122 cm) |
| Lift capacity | 1,800 lbs (816 kg) | 660 lb (299 kg) | 925 lb (420 kg) | - |
| Max feed speed | - | - | - | 42.7 m/min |
| Standard track length | 30 ft (9.1 m) | - | - | - |
| Tipping capacity | - | 1,890 lb (857 kg) | - | - |
| Track speed | 211 feet per minute | - | - | - |
| Travel speed | - | 7.2 km/h | - | - |
Normalised to the same units. A dash means the figure was not published.