Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Morbark Morbark 2755 Brush Chipper | Vermeer Vermeer HG8000TX Brush Chipper | Vermeer Vermeer TG9000 Brush Chipper | Vermeer Vermeer D750X900 Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 120,961 lb (54,867 kg) | 125,000 lb (56,699 kg) | 96,000 lb (43,545 kg) | 95,800 lb (43,454 kg) |
| Max reach | 23 ft (7.0 m) | - | - | - |
| Fuel capacity | 500.0 gal | - | - | 500.0 gal |
| Engine power | 1,050 hp | 949 hp | 1,000 hp | 801 hp |
| Breakout torque | - | - | - | 199,983.1 Nm |
| Chipper disc diameter | 83 in (211 cm) | - | - | - |
| Cutting capacity | 27 in (68.6 cm) | - | - | - |
| Drum cutting width | - | - | 64.0 in (163 cm) | - |
| Drum diameter | - | 42.0 in (107 cm) | - | - |
| Drum speed | - | - | 1,050 rpm | - |
| Feed table width | - | 71.5 in (182 cm) | - | - |
| Fuel tank capacity | - | 1,892.7 L | 1,760.2 L | - |
| Hydraulic tank capacity | - | 378.5 L | 567.8 L | 2,725.5 L |
| Infeed opening | 27 in (68.6 cm) | - | - | - |
| Lift capacity | 17,200 lb (7,802 kg) | - | - | - |
| Max carriage speed | - | - | - | 27.7 m/min |
| Max feed height | - | 75 in (190 cm) | - | - |
| Max spindle torque | - | - | - | 134,768.3 Nm |
| Screen area | - | - | 36,129 sq cm | - |
| Thrust pullback | - | - | - | 3,416.2 kN |
Normalised to the same units. A dash means the figure was not published.