Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Vermeer Vermeer BC700XL Brush Chipper | Morbark Morbark TW 160PH Brush Chipper | Bandit Bandit 65XP Brush Chipper | Morbark Morbark TW 230HB Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 1,799 lb (816 kg) | 1,340 lb (608 kg) | 2,000 lb (907 kg) | 1,565 lb (710 kg) |
| Fuel capacity | - | 4.8 gal | - | 4.8 gal |
| Engine power | 25 hp | 22 hp | 37 hp | 37 hp |
| Airflow cfm | 5,000 cfm | - | - | - |
| Chipper capacity | - | - | 6 in (15.2 cm) | - |
| Chipping capacity | - | 6 in (15.2 cm) | 6 in (15.2 cm) | 6.2 in (15.7 cm) |
| Cutting depth | 6.0 in (15.2 cm) | - | - | - |
| Drum width | 8.0 in (20.3 cm) | - | - | - |
| Dump box capacity | - | - | 8.5 cubic yards | - |
| Feed rate | - | - | 80 fpm | - |
| Feed table width | 41.2 in (105 cm) | - | - | - |
| Fuel tank capacity | 22.7 L | 18 L | 8 gallons | 18 L |
| Height | - | 6.9 ft (2.1 m) | - | 7.2 ft (2.2 m) |
| Hydraulic flow | - | - | 6 gpm | - |
| Hydraulic oil capacity | - | 15 L | - | - |
| Hydraulic tank capacity | - | - | 7 gallons | - |
| Length tray down | - | - | - | 11.5 ft (3.5 m) |
| Max diameter infeed | - | - | - | 6.3 in (160 mm) |
| Max infeed diameter | - | 6.0 in (15.2 cm) | - | - |
| Width | - | 4.3 ft (1.3 m) | - | 4.9 ft (1.5 m) |
Normalised to the same units. A dash means the figure was not published.