Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Vermeer Vermeer BP8000 Brush Chipper | Bandit Bandit 200UC Brush Chipper | Morbark Morbark D76SP Brush Chipper | Morbark Morbark TW 280FTR Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 3,739 lb (1,696 kg) | 4,799 lb (2,177 kg) | 3,680 lb (1,669 kg) | 3,510 lb (1,592 kg) |
| Flow rate | 10 gpm | - | - | - |
| Fuel capacity | - | - | 10.0 gal | 9.5 gal |
| Engine power | 85 hp | 84 hp | 62 hp | 57 hp |
| Axle capacity | - | 6,001 lb (2,722 kg) | - | - |
| Boom arc swing | - | - | 76 in (193 cm) | - |
| Chipping capacity | - | 12 in (30.5 cm) | - | 8.2 in (20.8 cm) |
| Cutter wheel speed | - | - | 1,200 RPM | - |
| Cutting capacity | - | 12.0 in (30.5 cm) | - | - |
| Disc diameter | - | 40.2 in (102 cm) | - | - |
| Feed rate | - | 120 ft/min | - | - |
| Fuel tank capacity | - | 92.7 L | - | - |
| Hydraulic oil capacity | - | - | 30 gallons | - |
| Hydraulic pressure | 2,000 psi | - | - | - |
| Hydraulic tank capacity | - | 45.4 L | - | - |
| Length forks down | 197 in (500 cm) | - | - | - |
| Lift capacity | 2,500 lbs (1,134 kg) | - | - | - |
| Max travel speed | - | - | 2.8 MPH | - |
| Width | 108 in (274 cm) | - | - | - |
Normalised to the same units. A dash means the figure was not published.