Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Vermeer Vermeer D23X30 Brush Chipper | Morbark Morbark M18R Brush Chipper | Morbark Morbark M15R Brush Chipper | Bandit Bandit 280HD Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 16,499 lb (7,484 kg) | 12,200 lb (5,534 kg) | 13,499 lb (6,123 kg) | 15,999 lb (7,257 kg) |
| Max pressure | 1,067 psi | - | - | - |
| Fuel capacity | - | 44.0 gal | 32.0 gal | - |
| Engine power | 101 hp | 114 hp | 174 hp | 275 hp |
| Chipper capacity | - | - | - | 18 in (45.7 cm) |
| Chipping capacity | - | 18 in (45.7 cm) | 15 in (38.1 cm) | 18 in (45.7 cm) |
| Drum diameter | - | 36 in (91.4 cm) | 30 in (76.2 cm) | - |
| Feed rate | - | - | - | 100 fpm |
| Fuel tank capacity | - | - | - | 60 gallon |
| Hydraulic capacity | - | - | 26 gallons | - |
| Hydraulic flow | - | - | - | 10 GPM |
| Hydraulic oil capacity | - | 41 gallons | - | - |
| Hydraulic tank capacity | - | - | - | 30 gallon |
| Infeed opening width | - | 65 in (165 cm) | 56 in (142 cm) | - |
| Max flow | 132.3 lpm | - | - | - |
| Max spindle torque | 4,068 Nm | - | - | - |
| Min transport width | 55.5 in (141 cm) | - | - | - |
| Noise level | 83 dB(A) | - | - | - |
| Thrust pullback | 106.8 kN | - | - | - |
Normalised to the same units. A dash means the figure was not published.