Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Vermeer Vermeer D500X500 Brush Chipper | Morbark Morbark 6600 Brush Chipper | Morbark Morbark 7600 Brush Chipper | Bandit Bandit 3090 (Towable) Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 84,801 lb (38,465 kg) | - | 106,501 lb (48,308 kg) | 60,001 lb (27,216 kg) |
| Fuel capacity | 500.0 gal | 430.0 gal | 430.0 gal | - |
| Engine power | 801 hp | 875 hp | 860 hp | 800 hp |
| Breakout torque | 199,983.1 Nm | - | - | - |
| Chipping capacity | - | - | - | 24.0 in (61 cm) |
| Discharge conveyor width | - | 48 in (122 cm) | - | - |
| Drum diameter | - | - | - | 37.0 in (94 cm) |
| Fuel tank capacity | - | - | - | 757.1 L |
| Gross weight | - | 91,440 lbs (41,476 kg) | - | - |
| Hammermill rotor diameter | - | 28 in (71.1 cm) | - | - |
| Hydraulic oil capacity | - | 238 gallons | 260 gallons | - |
| Hydraulic tank capacity | - | - | - | 757.1 L |
| Infeed opening width | - | 66 in (168 cm) | 76 in (193 cm) | - |
| Max carriage speed | 21.6 m/min | - | - | - |
| Max spindle torque | 71,722.8 Nm | - | - | - |
| Rpm | - | - | - | 1,120 RPM |
| Stacking height | - | - | 18 ft (5.5 m) | - |
| Throat opening width | - | - | - | 36.0 in (91.4 cm) |
| Thrust pullback | 2,193 kN | - | - | - |
Normalised to the same units. A dash means the figure was not published.