Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Vermeer Vermeer D750X900 Brush Chipper | Morbark Morbark 7600 Brush Chipper | Morbark Morbark 6600 Brush Chipper | Morbark Morbark 2755 Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 95,800 lb (43,454 kg) | 106,501 lb (48,308 kg) | - | 120,961 lb (54,867 kg) |
| Max reach | - | - | - | 23 ft (7.0 m) |
| Fuel capacity | 500.0 gal | 430.0 gal | 430.0 gal | 500.0 gal |
| Engine power | 801 hp | 860 hp | 875 hp | 1,050 hp |
| Breakout torque | 199,983.1 Nm | - | - | - |
| Chipper disc diameter | - | - | - | 83 in (211 cm) |
| Cutting capacity | - | - | - | 27 in (68.6 cm) |
| Discharge conveyor width | - | - | 48 in (122 cm) | - |
| Gross weight | - | - | 91,440 lbs (41,476 kg) | - |
| Hammermill rotor diameter | - | - | 28 in (71.1 cm) | - |
| Hydraulic oil capacity | - | 260 gallons | 238 gallons | - |
| Hydraulic tank capacity | 2,725.5 L | - | - | - |
| Infeed opening | - | - | - | 27 in (68.6 cm) |
| Infeed opening width | - | 76 in (193 cm) | 66 in (168 cm) | - |
| Lift capacity | - | - | - | 17,200 lb (7,802 kg) |
| Max carriage speed | 27.7 m/min | - | - | - |
| Max spindle torque | 134,768.3 Nm | - | - | - |
| Stacking height | - | 18 ft (5.5 m) | - | - |
| Thrust pullback | 3,416.2 kN | - | - | - |
Normalised to the same units. A dash means the figure was not published.