Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Vermeer Vermeer HG200 Brush Chipper | Bandit Bandit 200UC Brush Chipper | Morbark Morbark BVR10 Brush Chipper | Morbark Morbark BVR13 Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 5,540 lb (2,513 kg) | 4,799 lb (2,177 kg) | 5,201 lb (2,359 kg) | 5,201 lb (2,359 kg) |
| Fuel capacity | - | - | 16.9 gal | 16.9 gal |
| Engine power | 85 hp | 84 hp | 74 hp | 102 hp |
| Axle capacity | - | 6,001 lb (2,722 kg) | - | - |
| Chipping capacity | - | 12 in (30.5 cm) | 10 in (25.4 cm) | 13 in (33.0 cm) |
| Conveyor belt width | 18.0 in (45.7 cm) | - | - | - |
| Cutting capacity | - | 12.0 in (30.5 cm) | - | - |
| Disc diameter | - | 40.2 in (102 cm) | - | - |
| Discharge height | 5.6 ft (1.7 m) | - | - | - |
| Drum diameter | - | - | - | 18.1 in (46 cm) |
| Drum tip diameter | 22.3 in (56.6 cm) | - | - | - |
| Drum width | - | - | 16.5 in (42 cm) | 16.5 in (42 cm) |
| Feed rate | - | 120 ft/min | - | - |
| Feed throat height | 12.5 in (31.8 cm) | - | - | - |
| Fuel tank capacity | 94.6 L | 92.7 L | - | - |
| Hydraulic capacity | - | - | 26.5 L | 26.5 L |
| Hydraulic tank capacity | - | 45.4 L | - | - |
| Infeed opening height | - | - | - | 29.9 in (76 cm) |
| Infeed opening width | - | - | 59.8 in (152 cm) | 60 in (152 cm) |
| Rotor cutting length | 16.5 in (41.9 cm) | - | - | - |
| Throat opening height | - | - | 14.2 in (36 cm) | 14.2 in (36 cm) |
Normalised to the same units. A dash means the figure was not published.