Catalog / Compare
Compare equipment
Side by side, normalised to the same units, every figure traced to the manufacturer’s data.
| Vermeer Vermeer PD10 Brush Chipper | Bandit Bandit 2890 Brush Chipper | Bandit Bandit 65XP Brush Chipper | Morbark Morbark M15R Brush Chipper | |
|---|---|---|---|---|
| Operating weight | 14,136 lb (6,412 kg) | 5,320 lb (2,413 kg) | 7,101 lb (3,221 kg) | 13,499 lb (6,123 kg) |
| Fuel capacity | - | - | - | 32.0 gal |
| Engine power | 49 hp | - | 38 hp | 174 hp |
| Chipper capacity | - | - | 6 in (15.2 cm) | - |
| Chipping capacity | - | - | 6 in (15.2 cm) | 15 in (38.1 cm) |
| Cutter depth | - | 24.0 in (61 cm) | - | - |
| Cutter height | - | 31.5 in (80 cm) | - | - |
| Cutter swing | - | 75 in (190 cm) | - | - |
| Drum diameter | - | - | - | 30 in (76.2 cm) |
| Dump box capacity | - | - | 8.5 cubic yards | - |
| Feed rate | - | - | 80 fpm | - |
| Fuel tank capacity | 68.1 L | 71.9 L | 8 gallons | - |
| Height | - | 80 in (203 cm) | - | - |
| Hydraulic capacity | - | - | - | 26 gallons |
| Hydraulic flow | - | - | 6 gpm | - |
| Hydraulic tank capacity | 136.3 L | 111.7 L | 7 gallons | - |
| Infeed opening width | - | - | - | 56 in (142 cm) |
| Length | - | 162 in (412 cm) | - | - |
| Max hammer energy | 1,350 J | - | - | - |
| Max operating height | 24.9 ft (7.6 m) | - | - | - |
| Max travel speed | 2.7 km/h | - | - | - |
Normalised to the same units. A dash means the figure was not published.