Asv
RS-75
74 hp
Engine power
7,595 lb (3,445 kg)
Operating weight
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Operating weight |
|---|---|---|---|
| Case SR240B | 99% | 74 hp | 7,401 lb (3,357 kg) |
| Caterpillar 246D3 | 98% | 73 hp | 7,478 lb (3,392 kg) |
| Mustang 2750V | 98% | 72 hp | 7,553 lb (3,426 kg) |
| Case SV280B | 97% | 74 hp | 8,003 lb (3,630 kg) |
| Bobcat S66 | 97% | 73 hp | 7,211 lb (3,271 kg) |
| Case SR210B | 96% | 74 hp | 6,967 lb (3,160 kg) |
Documents
Full specifications
| Auxiliary Hydraulic: Auxiliary Hydraulic Connections | 2 flat face, 1/2 inch. 1 flat face 3/8 case drain | ↗ |
| Auxiliary Hydraulic: Auxiliary Pump Flow | 21.3 gpm | ↗ |
| Auxiliary Hydraulic: Features | Pilot Hydraulic Joystick Control, Attachement Control Kit | ↗ |
| Auxiliary Hydraulic: Maximum System Pressure | 3335 psi | ↗ |
| Drive Train: Chain Size | 100 ANSI | ↗ |
| Drive Train: Features | Hydrostatic Drive System, Bow Tie Drive System Chain Case | ↗ |
| Drive Train: Outside Tire Width | 72 in. | ↗ |
| Drive Train: Tractive Effort | 8,546 lbs (3,876 kg) | ↗ |
| Drive Train: Wheel Base | 49 in. | ↗ |
| Drive Train: Wheel Size | 12 x 16.5 in. | ↗ |
| Electrical System: Alternator Charging System | 95 Amp | ↗ |
| Electrical System: Battery | 800 CCA | ↗ |
| Electrical System: Features | Upgradeable Wiring Harness | ↗ |
| Electrical System: Nominal Charge | 12 V | ↗ |
| Electrical System: Port Outlet (Inside Operators Cab) | 1 - 12 V | ↗ |
| Engine: Displacement | 177 in. 3 | ↗ |
| Engine: Engine Power | 74.2 hp | ↗ |
| Engine: Features | Diesel 4-cylinder, Turbocharged Deutz TD2.9L4, Mechanically-Driven Fan and Coolant, Anti-Freeze Filled Radiator Cooling System, Dual Stage Intake Air Cleaner, Block Heater | ↗ |
| Engine: Gross Horsepower | 74.2 hp | ↗ |
| Engine: Meet All Emission Standards for Markets | USA and Canada | ↗ |
| Engine: Torque Peak | 192 ft-lb | ↗ |
| Operations: Bucket Roll Back at Ground Level | 25 in. | ↗ |
| Operations: Dump Height at Bucket Discharge | 100 in. | ↗ |
| Operations: Dump Reach at Bucket Discharge | 25 in. | ↗ |
| Operations: Engine Power | 74.2 hp | ↗ |
| Operations: Ground Clearance | Unloaded 10.5 in. / Loaded 10 in. | ↗ |
| Operations: Height to Bucket Pin | 125 in. | ↗ |
| Operations: Loader Arms | Radial | ↗ |
| Operations: Max. Travel Speed with 1 Speed | 8.1 mph | ↗ |
| Operations: Max. Travel Speed with 2 Speed | 11 mph | ↗ |
| Operations: Maximum Dump Angle at Full Height | 34 Degrees | ↗ |
| Operations: Operating Weight | 7,595 lbs (3,445 kg) | ↗ |
| Operations: Overall Length with Bucket | 145 in. | ↗ |
| Operations: Rated Operating Capacity @ 50% | 2,600 lbs (1,179 kg) | ↗ |
| Operations: Rear Angle of Departure | 24 Degrees | ↗ |
| Operations: Shipping Weight | 6,610 lbs (2,998 kg) | ↗ |
| Operations: Tipping Load | 5,200 lbs (2,359 kg) | ↗ |
| Operator Station: Drive Control | Left-hand pilot hydraulic joystick controls, machine speed and direction | ↗ |
| Operator Station: Features | Open ROPS, Suspension Seat w/2 | ↗ |
| Operator Station: Illumination | 2 Forward Facing Lights, 2 Rear Facing Lights | ↗ |
| Operator Station: Loader Control | Right-hand pilot hydraulic joystick controls loader lift/tilt, with variable control of aux hyd | ↗ |
| Operator Station: Multifunctional Display | Fuel, Tachometer, Engine Temperature, Engine Hours, Battery, Two Speed, Hydraulic Temperature, Engine Oil Pressure, Trip Hours and Multiple | ↗ |
| Operator Station: ROPS/FOPS | Meets ISO 3471, ISO 6683, ISO 3449 | ↗ |
| Service Capacity: Engine Coolant | 5 gal | ↗ |
| Service Capacity: Engine Oil (Including Filter) | 9 quarts | ↗ |
| Service Capacity: Fuel Tank | 28 gal | ↗ |
| Service Capacity: Hydraulic Tank | 10 gal | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →