Ditch Witch
RT125 Ride-On Trencher
121 hp
Engine power
8.1 ft (2.5 m)
Max dig depth
Full specifications
| Attachment - Angle of departure, transport, 24-inch blade | 27 ° | ↗ |
| Attachment - Angle of departure, transport, 30-inch blade | 22 ° | ↗ |
| Attachment - Angle of departure, transport, no blade | 30 ° | ↗ |
| Attachment - Attachment length, fully lowered, no blades | 103 in (262 cm) | ↗ |
| Attachment - Attachment length, fully raised, no blades | 70 in (178 cm) | ↗ |
| Attachment - Attachment weight | 2,350 lb (1,066 kg) | ↗ |
| Attachment - Attachment weight w/out boom, chain or plow blade | 3,065 lb (1,390 kg) | ↗ |
| Attachment - Cover depth* | 36 in (91.4 cm) | ↗ |
| Attachment - Transport length | 126 in (320 cm) | ↗ |
| Backfill Blade - Blade drop below ground | 10 in (25.4 cm) | ↗ |
| Backfill Blade - Blade height | 17 in (43.2 cm) | ↗ |
| Backfill Blade - Blade width | 80 in (203 cm) | ↗ |
| Backfill Blade - Lift height above ground | 26 in (66.0 cm) | ↗ |
| Backfill Blade - Manufacturer’s gross power rating | 121 hp | ↗ |
| Backfill Blade - Rated speed | 2,200 rpm | ↗ |
| Backfill Blade - Swing angle, max, left/right | 30 ° | ↗ |
| Backfill Blade - Tilt angle, up/down | 12 ° | ↗ |
| Battery - Auxiliary power outlet | 12 V, 10 amps | ↗ |
| Battery - Cold crank rating @ 0°F (-18°C) | 875 amps | ↗ |
| Battery - Group | 65 | ↗ |
| Battery - SAE reserve capacity rating | 165 min | ↗ |
| Centerline - Trench width, max | 24 in (61.0 cm) | ↗ |
| Ct120H - Trench depth, max | 97 in (246 cm) | ↗ |
| Dimensions - Angle of approach (A2) | 25 ° | ↗ |
| Dimensions - Angle of departure | 23.7 ° | ↗ |
| Dimensions - Angle of departure, transport, 24-inch blade | 30 ° | ↗ |
| Dimensions - Angle of departure, transport, no blade | 47.5 ° | ↗ |
| Dimensions - BH120 Ground clearance | 29 in (73.7 cm) | ↗ |
| Dimensions - Backhoe weight without bucket | 3,300 lb (1,497 kg) | ↗ |
| Dimensions - Bucket width | 12–24 in (30.5–61.0 cm) | ↗ |
| Dimensions - Height (H1) | 115 in (292 cm) | ↗ |
| Dimensions - Height (H2) | 105 in (267 cm) | ↗ |
| Dimensions - Length, transport (L2) | 154 in (391 cm) | ↗ |
| Dimensions - Nose to rear mount length (L1) | 125 in (318 cm) | ↗ |
| Dimensions - Reach from swing pivot | 158 in (401 cm) | ↗ |
| Dimensions - ST120H Angle of departure | 24 ° | ↗ |
| Dimensions - Swing arc | 180 ° | ↗ |
| Dimensions - Transport height | 118 in (300 cm) | ↗ |
| Dimensions - Tread (W4) | 64 in (163 cm) | ↗ |
| Dimensions - Trench width, max | 24 in (61.0 cm) | ↗ |
| Dimensions - Wheelbase (L4) | 79 in (201 cm) | ↗ |
| Dimensions - Width (W2) | 82 in (208 cm) | ↗ |
| Fluid Capacities - Coolant | 4.9 gal | ↗ |
| Fluid Capacities - DEF tank | 4.9 gal | ↗ |
| Fluid Capacities - Engine oil | 13.7 qt | ↗ |
| Fluid Capacities - Fuel tank | 38 gal | ↗ |
| Fluid Capacities - Hydraulic reservoir | 25 gal | ↗ |
| Fluid Capacities - Hydraulic system | 30 gal | ↗ |
| Hydraulic System @ 2,200 Rpm - Attachment pump capacity | 44 gpm | ↗ |
| Hydraulic System @ 2,200 Rpm - Attachment pump relief pressure | 6,500 psi | ↗ |
| Hydraulic System @ 2,200 Rpm - Auxiliary pump capacity | 5.3 gpm | ↗ |
| Hydraulic System @ 2,200 Rpm - Auxiliary pump relief pressure | 3,000 psi | ↗ |
| Hydraulic System @ 2,200 Rpm - Ground drive pump capacity | 26.7 gpm | ↗ |
| Hydraulic System @ 2,200 Rpm - Ground drive pump relief pressure | 5,300 psi | ↗ |
| Noise Level - Exterior | 107 dBA sound power per ISO 6393 | ↗ |
| Noise Level - Operator | 91 dBA sound pressure per ISO 6394 | ↗ |
| Operation - Allowable tractor weight, max | 22,000 lb (9,979 kg) | ↗ |
| Operation - Basic unit weight | 9,750 lb (4,423 kg) | ↗ |
| Operation - Forward speed, max | 8.3 mph | ↗ |
| Operation - Front and rear steer | 21 ft (6.4 m) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →