Hitachi
ZW160-7
165 hp
Engine power
28,704 lb (13,020 kg)
Operating weight
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Operating weight |
|---|---|---|---|
| XCMG XC948 | 97% | 173 hp | 29,101 lb (13,200 kg) |
| Komatsu WA270-8 | 94% | 149 hp | 29,079 lb (13,190 kg) |
| John Deere 544P | 94% | 165 hp | 32,353 lb (14,675 kg) |
| Kawasaki 67Z7 | 92% | 152 hp | 26,409 lb (11,979 kg) |
| Kawasaki 62Z7 | 89% | 152 hp | 24,381 lb (11,059 kg) |
| XCMG XC938U | 88% | 133 hp | 29,762 lb (13,500 kg) |
Documents
Full specifications
| Air Conditioning System | The air conditioning system contains fluorinated greenhouse gases. Refrigerant type: HFC-134a, GWP: 1430, Amount: 0.75±0.05kg, CO2e: 1.07±0.07ton. | ↗ |
| Aspiration | Turbocharger and intercooled | ↗ |
| Batteries | 2 x 12 V | ↗ |
| Bore and stroke | 107 mm X 124 mm | ↗ |
| Breakout force (kN) | 105 kN 10 690 kgf (Standard arm) 103 kN 10 490 kgf (High-lift arm) | ↗ |
| Bucket capacity (m³) ISO Heaped | 2.00 - 3.60 m 3 | ↗ |
| Cylinders | Double-acting piston type | ↗ |
| DEF AdBlue® tank | 18 L | ↗ |
| Drive system | Four-wheel drive system | ↗ |
| Engine Emissions | Complies with EU stage V | ↗ |
| Engine Model | CUMMINS B4.5 | ↗ |
| Engine Rated Power (kW) | 123 kW / 165hp@2.200rpm’s (ISO14396) | ↗ |
| Engine Type | 4-cycle water-cooled, direct injection | ↗ |
| Engine coolant | 20 L | ↗ |
| Engine oil | 16 L | ↗ |
| External sound level according to ISO 6395 and EU Directive 2000 14 EC | 104 LwA dB(A) | ↗ |
| Front axle differential & wheel hubs | 25 L | ↗ |
| Fuel tank | 205 L | ↗ |
| Ground clearance (minimum) (mm) | 16.9 in (430 mm) | ↗ |
| Height to bucket hinge pin, fully raised (mm) | 3 840 | ↗ |
| Hydraulic cylinders Type | Double acting type | ↗ |
| Hydraulic oil tank | 80 L | ↗ |
| Lift arm clearance at max lift (mm) | 3 570 mm (standard arm) 4 055 mm ( High-lift arm) | ↗ |
| Main pump | Gear type | ↗ |
| Maximum flow | 194 L/min at 2 200 min-1 (rpm) | ↗ |
| Maximum power ISO 14396 | 123 kW / 165 hp | ↗ |
| Maximum torque, gross | 755 Nm at 1 200 min-1 (rpm) | ↗ |
| No. of cylinders | 4 | ↗ |
| No. x Bore x Stroke | Arm : 2 x 125 mm x 760 mm Bucket : 1 x 150 mm x 495 mm | ↗ |
| Operating weight (kg) | 13 020 kg | ↗ |
| Optional | Refer to standard & optional equipment list | ↗ |
| Oscillation angle | Total 20° (+10° ,-10°) | ↗ |
| Overall height up to cab top (mm) | 3 280 mm | ↗ |
| Overall length (without bucket) (mm) | 6 420 mm (standard arm) 6 905 mm (High-lift arm) | ↗ |
| Parking brakes | Spring applied, hydraulically released, wet disc type | ↗ |
| Piston displacement | 4.46 L | ↗ |
| Rear axle differential & wheel hubs | 25 L | ↗ |
| Service brakes | Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front & rear independent brake circuit, HST (Hydro Static Transmission) system provides additional hydraulic braking capacity. | ↗ |
| Sound level in cab according to ISO 6396 | 67 LpA dB(A) | ↗ |
| Static tipping load (Straight) (kg) | 10 610 kg (Standard arm) 9 780 kg (High-lift arm) | ↗ |
| Steering angle | Each direction 40° ; total 80° | ↗ |
| Tire size | 20.5R25 (L3) | ↗ |
| Torque converter & transmission | 30 L | ↗ |
| Transmission | Electrical-controlled 2 motor hydrostatic transmission with summation gear box, Gear box : Fixed gear ratio, powershift countershaft type | ↗ |
| Travel speed* Forward Reverse 1st | 13 / 13 km/h (13 / 13 km/h) | ↗ |
| Travel speed* Forward Reverse 2nd | 13 / 13 km/h (13 / 13 km/h) | ↗ |
| Travel speed* Forward Reverse 3rd | 20 / 20 km/h (20 / 20 km/h) | ↗ |
| Travel speed* Forward Reverse 4th | 39 / 39 km/h (39 / 39 km/h) | ↗ |
| Turning radius (centerline of outside tire) (mm) | 5 085 mm | ↗ |
| Turning radius to inside of tires (mm) | 2 870 | ↗ |
| Type | Articulated frame steering | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →