Mitsubishi
FB80NH
11.2 ft (3.4 m)
Lift height
17,637 lb (8,000 kg)
Load capacity
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Lift height | Load capacity |
|---|---|---|---|
| XCMG XCF706K | 88% | 9.8 ft (3.0 m) | 15,432 lb (7,000 kg) |
| XCMG XCF1206K | 77% | 9.8 ft (3.0 m) | 26,455 lb (12,000 kg) |
| EP Equipment CPCD50T9 | 75% | 9.8 ft (3.0 m) | 11,023 lb (5,000 kg) |
| XCMG FD50T | 75% | 9.8 ft (3.0 m) | 11,023 lb (5,000 kg) |
| XCMG XCF506K | 75% | 9.8 ft (3.0 m) | 11,023 lb (5,000 kg) |
| Unicarriers FD100-3H-FD160S-3 | 73% | 24.3 ft (7.4 m) | 17,749 lb (8,051 kg) |
Documents
Full specifications
| Acceleration time (10 metres) with/without load | 7.4 / 5.6 s | ↗ |
| Axle loading with maximum load, front/rear (simplex mast, lowest lift height) | 18670 / 1425 kg | ↗ |
| Axle loading without load, front/rear (simplex mast, lowest lift height) | 6590 / 5505 kg | ↗ |
| Battery voltage/capacity at 5-hour discharge | 96 V/Ah | ↗ |
| Battery weight | 9,480 lb (4,300 kg) | ↗ |
| Drive motor capacity (60 min. short duty) | 2 ×15 kW | ↗ |
| Energy consumption according to VDI 60 cycle | 15.3 (40/45)3) kWh/h | ↗ |
| Fork carriage to DIN 15 173 A/B/no | 4A | ↗ |
| Fork carriage width | 51.2 in (1,300 mm) | ↗ |
| Fork dimensions (thickness, width, length) | 200 × 60 ×1200 mm | ↗ |
| Gradeability, with/without load | 6.4 / 11.1 % | ↗ |
| Ground clearance at centre of wheelbase, with load (forks lowered) | 6.5 in (165 mm) | ↗ |
| Ground clearance under mast, with load | 7.1 in (180 mm) | ↗ |
| Height to top of overhead guard | 95.3 in (2,420 mm) | ↗ |
| Height with mast extended | 178 in (4,530 mm) | ↗ |
| Height with mast lowered (see tables) | 110 in (2,792 mm) | ↗ |
| Length to fork face (includes fork thickness) | 143 in (3,640 mm) | ↗ |
| Lift height (see tables) | 134 in (3,400 mm) | ↗ |
| Lift motor output at 15% duty factor | 45 kW | ↗ |
| Lifting speed, with/without load | 0.2 / 0.35 m/s | ↗ |
| Load capacity | 17,637 lb (8,000 kg) | ↗ |
| Load centre distance | 23.6 in (600 mm) | ↗ |
| Load distance, axle to fork face (forks lowered) | 27.6 in (700 mm) | ↗ |
| Lowering speed, with/without load | 0.31 / 0.45 m/s | ↗ |
| Manufacturer's model designation | FB80NH | ↗ |
| Mast tilt, forwards/backwards | 5.5/61) ° | ↗ |
| Maximum drawbar pull, with/without load (5 min short duty) | 23300 / 24400 | ↗ |
| Maximum gradeability, with/without load | 11.6 / 19.6 s | ↗ |
| Operating pressure for attachments | 200 bar | ↗ |
| Operator type: pedestrian, (operator)-standing, -seated | Seated | ↗ |
| Overall length | 191 in (4,840 mm) | ↗ |
| Overall width | 1667 / 1830 mm | ↗ |
| Power source: (battery, diesel, LP gas, petrol) | Electric | ↗ |
| Rated drawbar pull, with/without load | 6400 / 7200 N | ↗ |
| Seat height | 52.4 in (1,330 mm) | ↗ |
| Service brakes (mechanical /hydraulic /electric /pneumatic) | Hydraulic / Electric | ↗ |
| Sound pressure level at the driver's seat | 72 dB (A) | ↗ |
| Tow coupling height | 18.3 in (465 mm) | ↗ |
| Track width (center of tyres), drive side | 1312 1375 1380 mm | ↗ |
| Track width (center of tyres), load side | 1227 1225 mm | ↗ |
| Travel speed, with/without load | 19 / 20 km/h | ↗ |
| Truck weight without load, with maximum battery weight | 26,665 lb (12,095 kg) | ↗ |
| Turning circle radius | 116 in (2,950 mm) | ↗ |
| Type of drive control | AC | ↗ |
| Tyre dimensions, front | 8.25-15 | ↗ |
| Tyre dimensions, rear | 22 ×9-16 23 ×10-12 | ↗ |
| Tyres: V=solid, L=pneumatic, SE=solid pneumatic - front/rear | SE | ↗ |
| Wheelbase | 100 in (2,550 mm) | ↗ |
| Working aisle width (Ast3) with 800 × 1200 mm pallets, load lengthwise, platform up/down | 201 in (5,095 mm) | ↗ |
| Working aisle width with 1000 × 1200 mm pallets, crosswise | 195 in (4,955 mm) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →