Mitsubishi
OPBL10P without EasyLift
3.4 ft (1.0 m)
Lift height
2,205 lb (1,000 kg)
Load capacity
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Lift height | Load capacity |
|---|---|---|---|
| Big Joe S22 / S22-R | 83% | 5.2 ft (1.6 m) | 2,200 lb (998 kg) |
| Clark SSX12/16/18 | 82% | 3.5 ft (1.1 m) | 3,250 lb (1,474 kg) |
| Vestil SL-63-AA | 78% | 5.2 ft (1.6 m) | 2,000 lb (907 kg) |
| Vestil S-62-AA | 78% | 5.2 ft (1.6 m) | 2,000 lb (907 kg) |
| Jungheinrich EKS 110 | 77% | 6.2 ft (1.9 m) | 2,205 lb (1,000 kg) |
| Raymond 8530 Rider Stacker | 72% | 6 ft (1.8 m) | 2,500 lb (1,134 kg) |
Documents
Full specifications
| Acceleration time (10 metres) with/without load | 5.6 / 4.9 s | ↗ |
| Axle loading with maximum load, front/rear (simplex mast, lowest lift height) | 470 / 2030 kg | ↗ |
| Axle loading without load, front/rear (simplex mast, lowest lift height) | 990 / 510 kg | ↗ |
| Battery to DIN 43 531/35/36 A/B/C/no | BS | ↗ |
| Battery voltage/capacity at 5-hour discharge | 24 / 600 V/Ah | ↗ |
| Battery weight | 992–1,102 lb (450–500 kg) | ↗ |
| Drive motor capacity (60 min. short duty) | 2.7 kW | ↗ |
| Fork carriage width | 22.0 in (560 mm) | ↗ |
| Fork dimensions (thickness, width, length) | 70/147/ 1150 mm | ↗ |
| Fork height, fully lowered | 3.5 in (90 mm) | ↗ |
| Ground clearance at centre of wheelbase, with load (forks lowered) | 1.4 in (35 mm) | ↗ |
| Height | 67.3 in (1,710 mm) | ↗ |
| Height of support legs | 115 | ↗ |
| Height of the drivers's platform | 47.2 in (1,200 mm) | ↗ |
| Height to top of overhead guard | 90.6 in (2,300 mm) | ↗ |
| Height with mast extended | 105 in (2,670 mm) | ↗ |
| Length to fork face (includes fork thickness) | 65.2 in (1,655 mm) | ↗ |
| Lift height (see tables) | 40.9 in (1,040 mm) | ↗ |
| Lift motor output at 15% duty factor | 2.2 (5%) kW | ↗ |
| Lifting speed, with/without load | 0.12 / 0.20 m/s | ↗ |
| Load capacity | 2,205 lb (1,000 kg) | ↗ |
| Load centre distance | 23.6 in (600 mm) | ↗ |
| Load distance, axle to fork face (forks lowered) | 3.9 in (100 mm) | ↗ |
| Lowering speed, with/without load | 0.25 / 0.23 m/s | ↗ |
| Manufacturer's model designation | OPBL10P without EasyLift | ↗ |
| Maximum gradeability, with/without load | 10.2 s | ↗ |
| Operator type: pedestrian, (operator)-standing, -seated | Stand-on | ↗ |
| Outside width over forks (minimum/maximum) | 17.7–27.6 in (450–700 mm) | ↗ |
| Overall length | 110 in (2,805 mm) | ↗ |
| Overall width | 31.9 in (810 mm) | ↗ |
| Power source: (battery, diesel, LP gas, petrol) | Battery | ↗ |
| Seat height | 6.3–47.2 in (160–1,200 mm) | ↗ |
| Service brakes (mechanical /hydraulic /electric /pneumatic) | Regenerative and electrical | ↗ |
| Sound pressure level at the driver's seat | 57 dB (A) | ↗ |
| Supplementary lift | 28.5 in (723 mm) | ↗ |
| Track width (center of tyres), load side | 26.5 in (674 mm) | ↗ |
| Transfer aisle width (pallet 1000 × 1200 mm lengthwise & 200 mm clearance) | Platform/load width + 90 mm clearance each side | ↗ |
| Travel speed, with/without load | 9/9 km/h | ↗ |
| Truck weight without load, with maximum battery weight | 3,307 lb (1,500 kg) | ↗ |
| Turning circle radius | 61.8 in (1,570 mm) | ↗ |
| Type of drive control | AC Traction | ↗ |
| Tyre dimensions, front | 250 × 105 | ↗ |
| Tyre dimensions, rear | 120 × 115 | ↗ |
| Tyres: V=solid, L=pneumatic, SE=solid pneumatic - front/rear | Vul/Vul | ↗ |
| Wheelbase | 54.0 in (1,371 mm) | ↗ |
| Working aisle width (Ast) with 1000 × 1200 mm pallets, load crosswise, platform up/down | Platform/load width + 90 mm clearance each side | ↗ |
| Working aisle width (Ast) with 800 × 1200 mm pallets, load lengthwise, platform up/down | 123 in (3,131 mm) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →