Skip to content
Heyquip Heyquip Catalog
Catalog
Multiquip

DCA36SPXU4F

66 hp
Engine power
100.0 gal
Fuel capacity
2,447 lb (1,110 kg)
Operating weight
36 kw
Power output
2,179 cc
displacement
11.1 lph
fuel consumption full load

Documents

Datasheet ↓
Archive ✓ Verified source Jul 2026
Operator Manual ↓
Archive ✓ Verified source Jul 2026
Service Manual ↓
Archive ✓ Verified source Jul 2026
Parts Manual ↓
Archive ✓ Verified source Jul 2026

Full specifications

100% Load61 h ↗
50% Load112 h ↗
Armature ConnectionSeries ↗
Coupler Rating3" Pintle Eye (25,000 lb)2" Ball Coupler (10,000 lb)2-5/16" Ball Coupler (14,000 lb) ↗
Design4-cycle, Water cooled, Direct injection, Turbocharged, Charge Air Cooled, EGR, DOC ↗
EmissionsTier 4 Final ↗
ExcitationBrushless with AVR ↗
Fits MQ Power Generator ModelsDCA70SSJU4FDCA70SSIU4FDCA45SSIU4FDCA40SSKU4F2DCA36SPXU4FDCA25SSIU4FDCA20SPXU4FDCA15SPXU4FDCA10SPXU4CTLG8SSK4F2DA7000SSA3 ↗
Frequency60 Hz ↗
Frequency Regulation (steady state load)±0.25% ↗
Fuel Tank Capacity100 gal | 378.54 L ↗
Generator DesignRevolving field, Self-ventilated, Drip-proof, Single bearing ↗
Generator RPM1800 ↗
Gross Axle Weight Rating (GAWR) (ea.)3,500 lb | 1,588 kg ↗
Gross Engine Power Output65.7 bhp | 49 kW ↗
Gross Vehicle Weight Rating (GVWR)7,000 lb | 3,175 kg ↗
Make/ModelIsuzu 4LE2X ↗
No. Poles4-pole ↗
Overall Height24.8 in | 599 mm ↗
Overall Length151.3 in | 3,843 mm ↗
Overall Width69.3 in | 1,760 mm ↗
Power Factor1.0 ↗
Prime Rating36 kW ↗
Sound Level (Full Load at 23 ft.)65 dB(A) ↗
Standby Rating40 kW ↗
Starting SystemElectric ↗
Tire Load Rating (ea.)1820 lb | 826 kg ↗
Tire SizeST205 / 75D15 LR-C ↗
Voltage - Single Phase120/240 V ↗
Voltage Regulation (No Load to Full Load)±0.5% ↗
Wheel Bolt Pattern5 Lug on 4.5 in ↗
With Fuel2,077 lb | 942 kg ↗
Without Fuel1,366 lb | 619.6 kg ↗

Every figure is traced to the manufacturer’s published data. ↗ opens the source.

Export for Heyquip

Populate your Heyquip store's product page with this model's specs, images, and cited documents.

Is this your equipment? Verify your specs →

Sources

Admin Open in admin →

Fix classification