Sany
SMG200C-8
253 hp
Engine power
45,107 lb (20,460 kg)
Operating weight
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Operating weight |
|---|---|---|---|
| XCMG GR2605T | 95% | 260 hp | 41,888 lb (19,000 kg) |
| Bell G140 Motor Grader | 92% | 240 hp | 40,589 lb (18,411 kg) |
| XCMG RP905i | 91% | 232 hp | 49,604 lb (22,500 kg) |
| Ammann ABG 8820 | 90% | 268 hp | 38,250 lb (17,350 kg) |
| Dynapac F1000T | 87% | 227 hp | 37,997 lb (17,235 kg) |
| XCMG RP905S | 87% | 212 hp | 49,604 lb (22,500 kg) |
Full specifications
| Blade Down Pressure | 88.63 kN / 19,925 lbf | ↗ |
| Drive Configuration | 6 x 4 | ↗ |
| Engine | Cummins QSL9 | ↗ |
| Engine Displacement | 8.9 L / 543.1 in³ | ↗ |
| Frame Articulation | 22° degrees | ↗ |
| Front Wheel Lean | 17° degrees | ↗ |
| Fuel Tank Capacity | 340 L / 89.82 gal | ↗ |
| Height Over ROPS | 3,498 mm / 11' 6" | ↗ |
| Minimum Turning Radius | 7.5 m / 295.28" | ↗ |
| Moldboard Height | 620 mm / 24.41" | ↗ |
| Moldboard Lift Above Ground | 480 mm / 18.9" | ↗ |
| Moldboard Width | 4,270 mm / 14' | ↗ |
| Net Power | 186 kW / 253 hp | ↗ |
| Operating Weight | 20,460 kg / 45,107 lbs | ↗ |
| Overall Length | 10,572 mm / 34' 8" | ↗ |
| Tire Size | 17.5-25 | ↗ |
| Transmission | Direct-Drive Power Shift 8F/6R | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →