Takeuchi
TB235-2
24 hp
Engine power
9,127 lb (4,140 kg)
bucket breakout force
46 L
fuel tank capacity
24.5 MPa
hydraulic system pressure
128 in (3,245 mm)
max digging depth
11.8 in (300 mm)
track width
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | bucket breakout force | fuel tank capacity |
|---|---|---|---|---|
| Case CX27B | 93% | 23 hp | - | 42 L |
| Case CX36 | 93% | 23 hp | - | 42 l |
| Case CX36B | 93% | 23 hp | - | 42 l |
| Bobcat T190 | 89% | 24 hp | - | 36.2 L |
| Kubota U27-4 | 85% | 20 hp | - | - |
| Case E1825 | 76% | 30 hp | - | 32.2 l |
Documents
Full specifications
| ENGINE - Displacement | 100.0 (1.6 L) cu in | ↗ |
| ENGINE - Horsepower @ 2,400 rpm | 24.4 (18.2 kW) hp | ↗ |
| ENGINE - Make / Model | Yanmar / 3TNV88F | ↗ |
| ENGINE - Maximum Torque @ 1,440 rpm | 68.0 (92.2 Nm) ft-lb | ↗ |
| FLUID CAPACITIES - Cooling System | 4.2 (4.0 L) qt | ↗ |
| FLUID CAPACITIES - Engine Lubrication | 5.0 (4.7 L) qt | ↗ |
| FLUID CAPACITIES - Fuel Consumption (65% of Full Load) | 0.90 (3.4 L / hr) gal / hr | ↗ |
| FLUID CAPACITIES - Fuel Tank Capacity | 12.2 (46.0 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic Reservoir Capacity | 9.2 (35.0 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic System Capacity | 18.0 (68.0 L) gal | ↗ |
| HYDRAULIC SYSTEM - Auxiliary Flow - Primary Circuit | 15.8 (60.0 L /min) gpm | ↗ |
| HYDRAULIC SYSTEM - Total Hydraulic Flow | 28.6 (108.4 L / min) gpm | ↗ |
| Hydraulic System Pressure | 3,553 (24.5 MPa) psi | ↗ |
| MACHINE DIMENSIONS - Front Swing Radius | 6 (2,005 mm) ft 6.9 in | ↗ |
| MACHINE DIMENSIONS - Front Swing Radius with Boom Offset | 5 (1,660 mm) ft 5.4 in | ↗ |
| MACHINE DIMENSIONS - Ground Clearance | 11.6 (295 mm) in | ↗ |
| MACHINE DIMENSIONS - Maximum Dig Height | 16 (5,010 mm) ft 5.2 in | ↗ |
| MACHINE DIMENSIONS - Maximum Digging Depth | 10 (3,245 mm) ft 7.8 in | ↗ |
| MACHINE DIMENSIONS - Maximum Dumping Height | 11 (3,595 mm) ft 9.5 in | ↗ |
| MACHINE DIMENSIONS - Maximum Reach | 17 (5,255 mm) ft 2.9 in | ↗ |
| MACHINE DIMENSIONS - Maximum Reach at Ground Level | 16 (5,130 mm) ft 10.0 in | ↗ |
| MACHINE DIMENSIONS - Maximum Vertical Digging Depth | 8 (2,495 mm) ft 2.2 in | ↗ |
| MACHINE DIMENSIONS - Tail Swing (Slew) Radius | 4 (1,330 mm) ft 4.4 in | ↗ |
| MACHINE DIMENSIONS - Track Width (Rubber) | 11.8 (300 mm) in | ↗ |
| MACHINE DIMENSIONS - Transport Height | 8 (2,510 mm) ft 2.8 in | ↗ |
| MACHINE DIMENSIONS - Transport Length | 16 (4,900 mm) ft 0.9 in | ↗ |
| MACHINE DIMENSIONS - Undercarriage Length | 6 (2,110 mm) ft 11.1 in | ↗ |
| MACHINE DIMENSIONS - Undercarriage Width | 5 (1,580 mm) ft 2.2 in | ↗ |
| OPERATING PERFORMANCE - Arm Length | 4 (1,445 mm) ft 9.0 in | ↗ |
| OPERATING PERFORMANCE - Ground Pressure (Cab) | 4.6 (31.4 kPa) psi | ↗ |
| OPERATING PERFORMANCE - Ground Pressure (Canopy) | 4.4 (30.4 kPa) psi | ↗ |
| OPERATING PERFORMANCE - Maximum Arm Digging Force | 3,889 (1,764 kg) lb | ↗ |
| OPERATING PERFORMANCE - Maximum Bucket Breakout Force | 9,127 (4,140 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Weight (Cab) | 7,639 (3,465 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Weight (Canopy) | 7,418 (3,365 kg) lb | ↗ |
| OPERATING PERFORMANCE - Slew Speed | 9.3 rpm | ↗ |
| OPERATING PERFORMANCE - Traction Force | 9,112 (4,130 kg) lb | ↗ |
| OPERATING PERFORMANCE - Travel Speed - High | 2.6 (4.2 km / hr) mph | ↗ |
| OPERATING PERFORMANCE - Travel Speed - Low | 1.7 (2.8 km / hr) mph | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →