Takeuchi
TB260
48 hp
Engine power
81 L
fuel tank capacity
12,756 lb (5,786 kg)
max bucket breakout force
153 in (3,895 mm)
max digging depth
166 in (4,220 mm)
max dump height
15.7 in (400 mm)
track width
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | fuel tank capacity | max bucket breakout force |
|---|---|---|---|---|
| JCB 55Z-1 | 99% | 48 hp | - | - |
| Kubota U55-5 | 97% | 48 hp | - | - |
| Case 410 | 95% | 51 hp | 83.3 L | - |
| Bobcat E42 | 93% | 42 hp | 79.9 L | - |
| Case 40XT | 91% | 56 hp | 83.3 L | - |
| Case 1840 | 90% | 54 hp | 73.8 L | - |
Documents
Full specifications
| ENGINE - Displacement | 127.6 (2.1 L) cu in | ↗ |
| ENGINE - Horsepower @ 2,400 rpm | 47.6 (35.5 kW) hp | ↗ |
| ENGINE - Make / Model | Yanmar / 4TNV86CT | ↗ |
| ENGINE - Maximum Torque @ 1,560 rpm | 130.5 (177.0 Nm) ft-lb | ↗ |
| FLUID CAPACITIES - Cooling System | 11.6 (11.0 L) qt | ↗ |
| FLUID CAPACITIES - Engine Lubrication | 7.8 (7.4 L) qt | ↗ |
| FLUID CAPACITIES - Fuel Consumption (65% of Full Load) | 1.6 (6.3 L / hr) gal / hr | ↗ |
| FLUID CAPACITIES - Fuel Tank Capacity | 21.3 (81.0 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic Reservoir Capacity | 12.9 (49.0 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic System Capacity | 23.8 (90.0 L) gal | ↗ |
| HYDRAULIC SYSTEM - Auxiliary Flow - Primary Circuit | 27.0 (102.2 L / min) gpm | ↗ |
| HYDRAULIC SYSTEM - Auxiliary Flow - Secondary Circuit | 11.6 (43.9 L / min) gpm | ↗ |
| HYDRAULIC SYSTEM - Total Hydraulic Flow | 45.3 (171.5 L / min) gpm | ↗ |
| Hydraulic System Pressure | 3,480 (24.0 MPa) psi | ↗ |
| MACHINE DIMENSIONS - Front Swing Radius | 7 (2,420 mm) ft 11.3 in | ↗ |
| MACHINE DIMENSIONS - Front Swing Radius with Boom Offset | 6 (1,975 mm) ft 5.8 in | ↗ |
| MACHINE DIMENSIONS - Ground Clearance | 13.1 (330 mm) in | ↗ |
| MACHINE DIMENSIONS - Maximum Dig Height | 19 (5,940 mm) ft 5.9 in | ↗ |
| MACHINE DIMENSIONS - Maximum Digging Depth | 12 (3,895 mm) ft 9.4 in | ↗ |
| MACHINE DIMENSIONS - Maximum Dumping Height | 13 (4,220 mm) ft 10.1 in | ↗ |
| MACHINE DIMENSIONS - Maximum Reach | 20 (6,270 mm) ft 6.9 in | ↗ |
| MACHINE DIMENSIONS - Maximum Reach at Ground Level | 20 (6,130 mm) ft 1.4 in | ↗ |
| MACHINE DIMENSIONS - Maximum Vertical Digging Depth | 9 (2,980 mm) ft 9.3 in | ↗ |
| MACHINE DIMENSIONS - Tail Swing (Slew) Radius | 4 (1,300 mm) ft 3.1 in | ↗ |
| MACHINE DIMENSIONS - Track Width (Rubber) | 15.7 (400 mm) in | ↗ |
| MACHINE DIMENSIONS - Transport Height | 8 (2,575 mm) ft 5.4 in | ↗ |
| MACHINE DIMENSIONS - Transport Length | 18 (5,550 mm) ft 2.5 in | ↗ |
| MACHINE DIMENSIONS - Undercarriage Length | 8 (2,575 mm) ft 5.3 | ↗ |
| MACHINE DIMENSIONS - Undercarriage Width | 6 (2,000 mm) ft 6.7 in | ↗ |
| OPERATING PERFORMANCE - Arm Length | 5 (1,780 mm) ft 10.1 in | ↗ |
| OPERATING PERFORMANCE - Ground Pressure - Cab (Rubber) | 4.4 (30.2 kPa) psi | ↗ |
| OPERATING PERFORMANCE - Ground Pressure - Cab (Steel) | 4.6 (31.5 kPa) psi | ↗ |
| OPERATING PERFORMANCE - Maximum Arm Digging Force | 5,755 (2,610 kg) lb | ↗ |
| OPERATING PERFORMANCE - Maximum Bucket Breakout Force | 12,756 (5,786 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Weight - Cab | 12,645 (5,735 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Weight - Canopy | 12,125 (5,500 kg) lb | ↗ |
| OPERATING PERFORMANCE - Slew Speed | 9.4 rpm | ↗ |
| OPERATING PERFORMANCE - Traction Force | 15,040 (6,822 kg) lb | ↗ |
| OPERATING PERFORMANCE - Travel Speed - High Range | 3.0 (4.9 km / hr) mph | ↗ |
| OPERATING PERFORMANCE - Travel Speed - Low Range | 1.7 (2.8 km / hr) mph | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →