Takeuchi
TW80 Series 3
27,999 lb (12,700 kg)
Operating weight
Documents
Full specifications
| ENGINE - Horsepower @ 2,200 rpm | 73.0 (54.0 kW) hp | ↗ |
| ENGINE - Make/Model | Deutz / TD2.9L Turbo | ↗ |
| ENGINE - Maximum Torque @ 1,800 rpm | 192.0 (260.0 Nm) ft-lb | ↗ |
| Engine Displacement | 176.0 (2.9 L) cu in | ↗ |
| FLUID CAPACITIES - Cooling System | 13.7 (13.0 L) qt | ↗ |
| FLUID CAPACITIES - Engine Lubrication | 8.5 (8.0 L) qt | ↗ |
| FLUID CAPACITIES - Front Axle Lubrication | 5.7 (5.4 L) qt | ↗ |
| FLUID CAPACITIES - Fuel Consumption (65% of Full Load) | 2.6 (10.0 L/hr) gal/hr | ↗ |
| FLUID CAPACITIES - Fuel Tank Capacity | 26.4 (100.0 L) gal | ↗ |
| FLUID CAPACITIES - Hydraulic Reservoir Capacity | 22.2 (84.0 L) gal | ↗ |
| FLUID CAPACITIES - Rear Axle Lubrication | 5.4 (5.1 L) qt | ↗ |
| HYDRAULIC SYSTEM - Auxiliary Flow - Optional Circuit | 26.0 (98.0 Lpm) gpm | ↗ |
| HYDRAULIC SYSTEM - Auxiliary Flow - Primary Circuit | 16.4 (62.0 Lpm) gpm | ↗ |
| Hydraulic System Pressure | 3,335 (23.0 MPa) psi | ↗ |
| MACHINE DIMENSIONS - Bucket Clearance Height | 9 (3,025 mm) ft 11.0 in | ↗ |
| MACHINE DIMENSIONS - Dump Angle | 45 ° | ↗ |
| MACHINE DIMENSIONS - Dump Height Fully Raised | 8 (2,605 mm) ft 6.0 in | ↗ |
| MACHINE DIMENSIONS - Ground Clearance | 1 (470 mm) ft 6.5 in | ↗ |
| MACHINE DIMENSIONS - Inside Turning Radius | 6 (1,898 mm) ft 3.0 in | ↗ |
| MACHINE DIMENSIONS - Max. Lift Height to Bucket Pin | 11 (3,380 mm) ft 1.0 in | ↗ |
| MACHINE DIMENSIONS - Max. Reach Fully Raised | 2 (740 mm) ft 5.0 in | ↗ |
| MACHINE DIMENSIONS - Outside Turning Radius | 13 (4,046 mm) ft 3.0 in | ↗ |
| MACHINE DIMENSIONS - Overall Height | 8 (2,730 mm) ft 11.5 in | ↗ |
| MACHINE DIMENSIONS - Overall Length with Bucket | 18 (5,580 mm) ft 3.0 in | ↗ |
| MACHINE DIMENSIONS - Overall Operating Height | 13 (4,220 mm) ft 10.0 in | ↗ |
| MACHINE DIMENSIONS - Overall Width without Bucket | 6 (2,050 mm) ft 9.0 in | ↗ |
| MACHINE DIMENSIONS - Recommended Bucket Width | 81.5 (2,070 mm) in | ↗ |
| MACHINE DIMENSIONS - Rollback Angle | 48 ° | ↗ |
| MACHINE DIMENSIONS - Turning Radius at Bucket Edge | 14 (4,478 mm) ft 8.0 in | ↗ |
| MACHINE DIMENSIONS - Wheel Base | 7 (2,200 mm) ft 2.6 in | ↗ |
| OPERATING PERFORMANCE - Bucket Breakout Force | 13,960 (6,333 kg) lb | ↗ |
| OPERATING PERFORMANCE - Lift Arm Breakout Force | 12,387 (5,618 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Capacity, SAE J818* | 4,301 (1,951 kg) lb | ↗ |
| OPERATING PERFORMANCE - Operating Weight - Cab | 12,700 (5,760 kg) lb | ↗ |
| OPERATING PERFORMANCE - Optional High Speed Travel | 24.8 (40.0 km/hr) mph | ↗ |
| OPERATING PERFORMANCE - Tipping Load, Full Turn | 8,602 (3,902 kg) lb | ↗ |
| OPERATING PERFORMANCE - Tipping Load, Straight | 9,742 (4,419 kg) lb | ↗ |
| OPERATING PERFORMANCE - Traction Force | 12,049 (5,466 kg) lb | ↗ |
| OPERATING PERFORMANCE - Travel Speed - High Range | 12.4 (20.0 km/hr) mph | ↗ |
| OPERATING PERFORMANCE - Travel Speed - Low Range | 4.0 (6.5 km/hr) mph | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →