Toro
Dingo TX 1000 TURBO Track Loader, Wide
2,791 lb (1,266 kg)
Operating weight
0 diesel
fuel type
4.7 mph
ground speed
81 in (206 cm)
hinge pin height
1,075 lbs (488 kg)
lift capacity
105 in (267 cm)
max operating height
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Operating weight | fuel type | ground speed |
|---|---|---|---|---|
| Caterpillar 275 | 73% | 1,296 lb (588 kg) | 0 diesel | - |
| Bobcat T64 | 69% | 8,728 lb (3,959 kg) | 0 diesel | - |
| Case TV370B | 64% | 9,965 lb (4,520 kg) | 0 diesel | - |
| Bobcat T740 | 63% | 10,417 lb (4,725 kg) | 0 Diesel | - |
| Bobcat T35.105L | 59% | 16,182 lb (7,340 kg) | 0 Diesel | - |
| Wacker Neuson ST31 | 50% | 8,095 lb (3,672 kg) | - | - |
Documents
Full specifications
| Dump Angle | 40 deg | ↗ |
| Dump Height | 60.3 in. / 153.2 cm | ↗ |
| Engine Horsepower | 24.7 hp (18.4 kW) | ↗ |
| Engine Make | Yanmar | ↗ |
| Engine Model | 3TNV80FT Turbo Diesel Tier 4 & EU Stage 5 compliant | ↗ |
| Fuel Tank | 10.25 gal. / 38.8 L | ↗ |
| Ground Clearance | 5.9 in. / 14.9 cm | ↗ |
| Ground Pressure | 4.1 psi | ↗ |
| Ground Speed - Forward | Up to 4.1 mph / 6.6 km/h | ↗ |
| Ground Speed - Reverse | Up to 4.1 mph / 6.6 km/h | ↗ |
| Height | 54.5 in. / 138.4 cm | ↗ |
| Hinge Pin Height | 81 in. / 205.7 cm | ↗ |
| Hydraulic High Flow | 13.2 GPM | ↗ |
| Hydraulic Low Flow | 4.9 GPM | ↗ |
| Hydraulic Pressure | 3,000 psi | ↗ |
| Length | 83 in. / 210.8 cm | ↗ |
| Max Operating Height | 106.2 in. / 269.7 cm | ↗ |
| Model | 22588 | ↗ |
| Rated Operating Capacity | 1,000 lbs / 454 kg | ↗ |
| Reach - Fully Raised | 23.3 in. / 59.2 cm | ↗ |
| Track Width | 9.1 in. / 23.1 cm | ↗ |
| Weight | 2,911 lbs / 1,320 kg | ↗ |
| Wheelbase | 39 in. / 99.0 cm | ↗ |
| Width | 39.9 in. / 101.3 cm | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →