Vermeer
AX17 Brush Chipper
130 hp
Engine power
40.0 gal
Fuel capacity
9,751 lb (4,423 kg)
Operating weight
17.0 in (43.2 cm)
chipping capacity
20 in (50.8 cm)
drum width
29 m/min
feed speed max
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Bandit Intimidator 18XP | 94% | 147 hp | - | 9,700 lb (4,400 kg) |
| Morbark Eeger Beever 1621X | 90% | 142 hp | 32.0 gal | 9,550 lb (4,332 kg) |
| Morbark Eeger Beever 1922 | 89% | 157 hp | 44.0 gal | 10,353 lb (4,696 kg) |
| Bandit Intimidator 15XP | 87% | 139 hp | - | 12,000 lb (5,443 kg) |
| Morbark Eeger Beever 1821 | 85% | 157 hp | 32.0 gal | 8,900 lb (4,037 kg) |
| Morbark BVR19 | 80% | 275 hp | 40.0 gal | 8,999 lb (4,082 kg) |
Documents
Full specifications
| Actuation Force | 34 lbs (15.4 kg) | ↗ |
| Actuation Force (BFSB) | 34 lbs (15.4 kg) | ↗ |
| Adjustable Height Discharge Chute | Optional | ↗ |
| Air Cleaner | 2 -Stage Dry | ↗ |
| Alternator | 60 amp | ↗ |
| Auto Reverse PSI | 2800 psi | ↗ |
| Axle/Suspension | 10,000 -lb torsion | ↗ |
| Battery | Group 31 - 950 CCA | ↗ |
| Bedknife - Number of Useable Edges | 2 | ↗ |
| Bedknife Material | 1018 | ↗ |
| Bedknife Size | 3 in x 20.25 in (7.6 cm x 51.4 cm) | ↗ |
| Bedknife Thickness | 1.3 in (33.0 mm) | ↗ |
| Belt Idler/Tensioner | Yes | ↗ |
| Belt Type | 5 V | ↗ |
| Bore | 2.9 in (73.7 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | .12 in | ↗ |
| Bottom Thickness | .7 in | ↗ |
| Brake Type | Standard electric | ↗ |
| Capacity - Option One | 10,000 lb (4,536 kg) | ↗ |
| Chute Height | 110 in (281 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Manual lever | ↗ |
| Clutch Type | Spring-loaded clutch | ↗ |
| Controller | MPC-12 | ↗ |
| Coolant Capacity (Engine and Radiator) | 5.5 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 26 in (66.0 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | MPC-12 | ↗ |
| Distance from Feed Table to Ground | 30 in (76.2 cm) | ↗ |
| Dynamic Capacity | 41,800 lbs (18,960 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 22 in suction | ↗ |
| Feed Roller Clamp Load | 3,000 lbs (1,361 kg) | ↗ |
| Feed Roller Clamp Type | Hydraulic | ↗ |
| Feed Roller Dimension | 15 in x 20 in (38.1 cm x 50.8 cm) | ↗ |
| Feed Roller Dimension (Two) | 11 in x 20 in (27.9 cm x 50.8 cm) | ↗ |
| Feed Roller Minimum Distance to Drum | .4 in | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Speed | 95 ft/min | ↗ |
| Fender Description | Bolt-on steel | ↗ |
| Filtration Method | 3 micron return, no suction | ↗ |
| Fixture Method | Weld On | ↗ |
| Flow Control | No | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | Z Channel: .25-in (.64-cm) thickness | ↗ |
| Fuel Tank Capacity | 40 gal | ↗ |
| Fuel Type | Diesel | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 134 hp | ↗ |
| Height | 110 in (281 cm) | ↗ |
| Hitch Type | 3-in ID pintle | ↗ |
| Hydraulic Chute Controls | Optional | ↗ |
| Hydraulic Outriggers | Optional | ↗ |
| Infeed Hopper Height | 29 in (73.7 cm) | ↗ |
| Infeed Table Length | 52 in (132 cm) | ↗ |
| Infeed Table Material Thickness | .3 in | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →