Vermeer
AX19 Brush Chipper
173 hp
Engine power
40.0 gal
Fuel capacity
11,199 lb (5,080 kg)
Operating weight
19.0 in (48.3 cm)
chipping capacity
1,100 rpm
drum speed
36.3 m/min
feed speed
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Bandit Intimidator 18XP | 93% | 174 hp | - | 9,700 lb (4,400 kg) |
| Morbark Eeger Beever 1922 | 93% | 157 hp | 44.0 gal | 10,900 lb (4,944 kg) |
| Morbark BVR19 | 89% | 275 hp | 40.0 gal | 10,501 lb (4,763 kg) |
| Morbark M15R | 87% | 174 hp | 32.0 gal | 13,499 lb (6,123 kg) |
| Bandit 255XP | 86% | 174 hp | - | 8,199 lb (3,719 kg) |
| Bandit Intimidator 15XP | 84% | 174 hp | - | 8,001 lb (3,629 kg) |
Documents
Full specifications
| Actuation Force | 34 lbs (15.4 kg) | ↗ |
| Actuation Force (BFSB) | 34 lbs (15.4 kg) | ↗ |
| Adjustable Height Discharge Chute | Optional | ↗ |
| Air Cleaner | 2 Stage Dry | ↗ |
| Alternator | 90 | ↗ |
| Auto Reverse PSI | 2800 psi | ↗ |
| Axle/Suspension | Tandem Torsion 7000 lb capacity | ↗ |
| Battery | 950 CCA | ↗ |
| Bedknife - Number of Useable Edges | 4 | ↗ |
| Bedknife Material | 1018 CD | ↗ |
| Bedknife Size | 3" x 20.25" | ↗ |
| Bedknife Thickness | 1.3 in (33.0 mm) | ↗ |
| Belt Idler/Tensioner | Spring loaded | ↗ |
| Belt Type | 5 V | ↗ |
| Bore | 2.5 in (63.5 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | 11 GA | ↗ |
| Bottom Thickness | .1 in | ↗ |
| Brake Type | Electric | ↗ |
| Capacity - Option One | 14,000 (Tandem 7,000 lbs) | ↗ |
| Chute Height | 108 in (274 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Manual Lever | ↗ |
| Clutch Type | 12" Spring Loaded | ↗ |
| Controller | Vermeer ACS: C248 | ↗ |
| Coolant Capacity (Engine and Radiator) | 32 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 36 in (91.4 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | MFD | ↗ |
| Distance from Feed Table to Ground | 30.3 in (77.0 cm) | ↗ |
| Dynamic Capacity | 31,400 lbs (14,243 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 26" Suction | ↗ |
| Feed Roller Clamp Load | 4,000 lbs (1,814 kg) | ↗ |
| Feed Roller Clamp Type | Hydraulic | ↗ |
| Feed Roller Dimension | 19" dia x 28.25 length | ↗ |
| Feed Roller Dimension (Two) | 11" dia x 28.25 length | ↗ |
| Feed Roller Minimum Distance to Drum | 5 in (12.7 cm) | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Speed | 119 ft/min | ↗ |
| Fender Description | Bolt-on | ↗ |
| Filtration Method | 6 micron return, 100 micron suction | ↗ |
| Fixture Method | Weld-on | ↗ |
| Flow Control | No | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | 7.5" Z-Channel x 0.25" Thick | ↗ |
| Fuel Tank Capacity | 40 gal | ↗ |
| Fuel Type | Diesel | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 173 hp | ↗ |
| Height | 108 in (274 cm) | ↗ |
| Hitch Type | Pintle | ↗ |
| Hydraulic Chute Controls | Standard | ↗ |
| Hydraulic Outriggers | Optional (Manual only) | ↗ |
| Infeed Hopper Height | 35 in (88.9 cm) | ↗ |
| Infeed Table Length | 60.5 in (154 cm) | ↗ |
| Infeed Table Material Thickness | .3 in | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →