Vermeer
BC1000XL Tier 4 Final Brush Chipper
49 hp
Engine power
25.0 gal
Fuel capacity
4,996 lb (2,266 kg)
Operating weight
12.0 in (30.5 cm)
chipping capacity
2,126 rpm
drum speed
20 in (50.8 cm)
drum width
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Morbark M12R | 94% | - | 24.5 gal | 5,501 lb (2,495 kg) |
| Morbark Eeger Beever 1215 | 91% | 62 hp | 24.5 gal | 5,201 lb (2,359 kg) |
| Bandit Intimidator 12XC | 86% | 62 hp | - | 4,601 lb (2,087 kg) |
| Bandit 2890 | 85% | - | - | 5,320 lb (2,413 kg) |
| Bandit 90XP | 85% | 37 hp | - | 3,999 lb (1,814 kg) |
| Bandit Intimidator 12XPC | 84% | 67 hp | - | 5,300 lb (2,404 kg) |
Documents
Full specifications
| Actuation Force | 34 lbs (15.4 kg) | ↗ |
| Actuation Force (BFSB) | 34 lbs (15.4 kg) | ↗ |
| Air Cleaner | 2-stage dry with safety element | ↗ |
| Alternator | 95 Amp | ↗ |
| Axle/Suspension | Torsion | ↗ |
| Axle/Suspension - Option Two | Torsion | ↗ |
| Battery | Group 31; 950 CCA | ↗ |
| Bedknife - Number of Useable Edges | 4 | ↗ |
| Bedknife Material | 1018 | ↗ |
| Bedknife Size | 3.5" x 17.3" (8.9 cm x 43.8 cm) | ↗ |
| Bedknife Thickness | 1 in (25.4 mm) | ↗ |
| Belt Idler/Tensioner | Yes | ↗ |
| Belt Type | 5 V | ↗ |
| Bore | 2.4 in (61.0 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | 11 GA | ↗ |
| Brake Type | Standard electric or optional hydraulic | ↗ |
| Capacity - Option One | 5200 lb (2358.7 kg) | ↗ |
| Capacity - Option Two | 7000 lb (3175.2 kg) | ↗ |
| Chute Height | 101 in (257 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Belt tensioner | ↗ |
| Clutch Type | Clutchless PTO | ↗ |
| Controller | Vermeer ACS | ↗ |
| Coolant Capacity (Engine and Radiator) | 2.9 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Diameter | 20 in (50.8 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | Multifunctional display (MFD) | ↗ |
| Distance from Feed Table to Ground | 26 in (66.0 cm) | ↗ |
| Dynamic Capacity | 31,400 lbs (14,243 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 15" (38.1 cm) suction | ↗ |
| Feed Roller Clamp Load | 350 lbs (159 kg) | ↗ |
| Feed Roller Dimension | 20" x 17" (50.8 cm x 43.2 cm) | ↗ |
| Feed Roller Minimum Distance to Drum | 1 in (25.4 mm) | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Speed | 105 ft/min | ↗ |
| Fender Description | Bolt-on-steel | ↗ |
| Filtration Method | 10 micron return; 100 micron suction | ↗ |
| Fixture Method | Weld-on | ↗ |
| Flow Control | No | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | 7" (17.78 cm) Z channel; 0.25" (0.64 cm) thickness | ↗ |
| Fuel Tank Capacity | 25 gal | ↗ |
| Fuel Type | Diesel | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 49 hp | ↗ |
| Height | 101 in (257 cm) | ↗ |
| Hitch Type | Pintle | ↗ |
| Infeed Hopper Height | 12 in (30.5 cm) | ↗ |
| Infeed Table Length | 32 in (81.3 cm) | ↗ |
| Infeed Table Material Thickness | .2 in | ↗ |
| Infeed Table Width | 52 in (132 cm) | ↗ |
| Infeed Throat Capacity | 12" H x17" W (30.5 cm H x 43.2 cm W) | ↗ |
| Knife Size | 0.63" x 4.5" x 9" (1.6 cm x 11.4 cm x 22.9 cm) | ↗ |
| Knife Thickness | .6 in | ↗ |
| Length - Feed Table Up, Tongue In | 157 in (399 cm) | ↗ |
| Length - Table Down, Tongue Extended | 205 in (521 cm) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →