Vermeer
BC1800XL Tier 4 Final Brush Chipper
139 hp
Engine power
35.0 gal
Fuel capacity
9,599 lb (4,354 kg)
Operating weight
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Morbark Eeger Beever 1621X | 94% | 142 hp | 32.0 gal | 10,201 lb (4,627 kg) |
| Morbark Eeger Beever 1821 | 91% | 157 hp | 32.0 gal | 8,900 lb (4,037 kg) |
| Bandit Intimidator 18XP | 89% | 174 hp | - | 9,700 lb (4,400 kg) |
| Morbark BVR16 | 85% | 174 hp | 30.0 gal | 8,501 lb (3,856 kg) |
| Morbark Eeger Beever 1922 | 85% | 157 hp | 44.0 gal | 10,900 lb (4,944 kg) |
| Bandit 255XP | 83% | 174 hp | - | 8,199 lb (3,719 kg) |
Documents
Full specifications
| Adjustable Height Discharge Chute | Optional | ↗ |
| Air Cleaner | 2 Stage Dry | ↗ |
| Air Flow | 3544 cfm | ↗ |
| Alternator | 90 | ↗ |
| Auto Reverse PSI | 2400 psi | ↗ |
| Axle/Suspension | Torflex | ↗ |
| Battery | 950 cca | ↗ |
| Bedknife - Number of Useable Edges | 4 | ↗ |
| Bedknife Material | 1018 CD | ↗ |
| Bedknife Size | 3" x 20.25" | ↗ |
| Bedknife Thickness | 1.3 in (33.0 mm) | ↗ |
| Belt Idler/Tensioner | Spring loaded | ↗ |
| Belt Type | 5 V | ↗ |
| Bore | 2.9 in (73.7 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Feed Stop Bar Diameter | 2 in (50.8 mm) | ↗ |
| Bottom Feed Stop Bar Material Thickness | 11 GA | ↗ |
| Bottom Thickness | .1 in | ↗ |
| Brake Type | Electric | ↗ |
| Capacity - Option One | 10,000 | ↗ |
| Chute Height | 110 in (279 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Manual Lever | ↗ |
| Clutch Type | 12" Spring Loaded | ↗ |
| Controller | Vermeer ACS: CB02 | ↗ |
| Coolant Capacity (Engine and Radiator) | 32 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 36 in (91.4 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Display | MFD | ↗ |
| Distance from Feed Table to Ground | 30.5 in (77.5 cm) | ↗ |
| Dynamic Capacity | 41,800 lbs (18,960 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 26" Suction | ↗ |
| Feed Roller Clamp Load | 380 lbs (172 kg) | ↗ |
| Feed Roller Clamp Type | Spring | ↗ |
| Feed Roller Dimension | 23.5" x 18 | ↗ |
| Feed Roller Dimension (Two) | 23.5" x 18 | ↗ |
| Feed Roller Orientation | Vertical | ↗ |
| Feed Speed | 117 ft/min | ↗ |
| Fender Description | Integrated | ↗ |
| Filtration Method | 3 micron return, 100 micron suction | ↗ |
| Fixture Method | Weld on | ↗ |
| Flow Control | Yes | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | 7" x 2.13" Channel | ↗ |
| Fuel Tank Capacity | 35 gal | ↗ |
| Fuel Type | Diesel | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 139 hp | ↗ |
| Height | 107 in (272 cm) | ↗ |
| Hitch Type | Pintle | ↗ |
| Hydraulic Chute Controls | Optional | ↗ |
| Infeed Hopper Height | 34 in (86.4 cm) | ↗ |
| Infeed Table Length | 36 in (91.4 cm) | ↗ |
| Infeed Table Material Thickness | .2 in | ↗ |
| Infeed Table Width | 67 in (170 cm) | ↗ |
| Infeed Throat Capacity | 20" x 24" | ↗ |
| Knife Size | 0.625 x 5 x 10 | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →