Vermeer
BC2100XL Tier 4 Final Brush Chipper
275 hp
Engine power
65.0 gal
Fuel capacity
16,200 lb (7,348 kg)
Operating weight
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Bandit 280HD | 99% | 275 hp | - | 15,999 lb (7,257 kg) |
| Morbark Eeger Beever 2131 | 89% | 275 hp | 60.0 gal | 12,200 lb (5,534 kg) |
| Bandit Intimidator 21XP | 87% | 350 hp | - | 15,399 lb (6,985 kg) |
| Morbark Eeger Beever 2230 | 87% | 415 hp | 65.0 gal | 17,300 lb (7,847 kg) |
| Bandit FLYER-21XP-WEB | 87% | 345 hp | - | 15,399 lb (6,985 kg) |
| Morbark M20 Forestry Brush Chipper | 85% | 415 hp | 65.0 gal | 18,001 lb (8,165 kg) |
Documents
Full specifications
| Adjustable Height Discharge Chute | Optional | ↗ |
| Air Cleaner | DF900P Series Fleetguard Direct Flow with integral precleaner and secondary element | ↗ |
| Air Flow | 3600 cfm | ↗ |
| Alternator | 130 amp Delco-Remy 245I | ↗ |
| Auto Reverse PSI | 2550 psi | ↗ |
| Axle/Suspension | Tandem torsion 8000 lb (3628.7 kg) capacity | ↗ |
| Battery | 2 - 950 CCA | ↗ |
| Bedknife - Number of Useable Edges | 4 | ↗ |
| Bedknife Size | 3 " x 27.5 " (7.6 cm x 69.9 cm) | ↗ |
| Belt Idler/Tensioner | Torsion arm spring-loaded | ↗ |
| Belt Type | 5V chipper poly type | ↗ |
| Bore | 3.4 in (86.4 mm) | ↗ |
| Bottom Feed Stop Bar | Standard | ↗ |
| Bottom Thickness | .1 in | ↗ |
| Brake Type | Electric | ↗ |
| Capacity - Option One | 235/75R17.5 load range J | ↗ |
| Chute Height | 116 in (295 cm) | ↗ |
| Chute Rotation Angle | 270 deg | ↗ |
| Clutch Drive Engagement | Clutchless PTO | ↗ |
| Controller | C148 | ↗ |
| Coolant Capacity (Engine and Radiator) | 8.8 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Deflector Thickness | .1 in | ↗ |
| Diameter | 36 in (91.4 cm) | ↗ |
| Directional Control | Yes | ↗ |
| Distance from Feed Table to Ground | 30.8 in (78.2 cm) | ↗ |
| Dynamic Capacity | 65,500 lbs (29,710 kg) | ↗ |
| Extended Warranty | Optional | ↗ |
| Fan | 26" (66 cm) suction | ↗ |
| Feed Roller Clamp Load | 3,500 lbs (1,588 kg) | ↗ |
| Feed Roller Clamp Type | Hydraulic | ↗ |
| Feed Roller Dimension | 19 " (48.3 cm) | ↗ |
| Feed Roller Minimum Distance to Drum | 10 in (25.4 cm) | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Speed | 100 ft/min | ↗ |
| Fender Description | Bolt-on | ↗ |
| Filtration Method | 10 micron return, 100 mesh suction | ↗ |
| Fixture Method | Weld-on | ↗ |
| Four Position Feed Control Bar | Standard | ↗ |
| Frame Description | 2.5" x 8.75" (6.4 cm x 22.2 cm) C-channel | ↗ |
| Fuel Tank Capacity | 65 gal | ↗ |
| Fuel Type | Ultra-low sulfur diesel | ↗ |
| Green Hold to Run Button | Standard | ↗ |
| Gross Horsepower (Maximum) | 275 hp | ↗ |
| Height | 116 in (296 cm) | ↗ |
| Hitch Type | 3 " (7.6 cm) pintle | ↗ |
| Hydraulic Outriggers | Optional | ↗ |
| Infeed Hopper Height | 38.5 in (97.8 cm) | ↗ |
| Infeed Table Length | 60.5 in (154 cm) | ↗ |
| Infeed Table Material Thickness | .4 in | ↗ |
| Infeed Table Width | 72 in (183 cm) | ↗ |
| Infeed Throat Capacity | 40 in x 24 in | ↗ |
| Knife Size | 5 " x 14 " (12.7 cm x 35.6 cm) | ↗ |
| Knife Thickness | .6 in | ↗ |
| Length - Table Down, Tongue Extended | 259 in (658 cm) | ↗ |
| Make and Model | Cummins QSB 6.7 L Tier 4 Final | ↗ |
| Manufacturer | Dodge | ↗ |
| Manufacturer - Option One | Dexter | ↗ |
| Material | A8 chipper steel | ↗ |
| Material Capacity | 21 in (53.3 cm) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →