Vermeer
D220x500 S3 HDD
416 hp
Engine power
1,204 psi
Max pressure
92,502 lb (41,958 kg)
Operating weight
1,323 L/min
max flow
3.1 km/hr
max ground drive speed
71,316 Nm
max spindle torque
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Max pressure | Operating weight |
|---|---|---|---|---|
| Ditch Witch AT120 | 61% | 280 hp | - | 49,761 lb (22,571 kg) |
| Ditch Witch JT120 Directional Drill | 59% | 280 hp | - | 47,186 lb (21,403 kg) |
| Ditch Witch JT100 | 57% | 260 hp | - | 47,770 lb (21,668 kg) |
| Ditch Witch HT220 | 49% | 215 hp | - | 42,990 lb (19,500 kg) |
| Ditch Witch AT60 All Terrain Directional Drill | 40% | 190 hp | - | 31,081 lb (14,098 kg) |
| Ditch Witch JT60 Directional Drill | 40% | 190 hp | - | 31,081 lb (14,098 kg) |
Documents
Full specifications
| Aspiration | Turbo charged | ↗ |
| Brand | Weatherford Tri-Plex | ↗ |
| Breakout System | Semi-open top vise | ↗ |
| Cab | Yes | ↗ |
| Cooling Method | Liquid | ↗ |
| Drill Rack Angle | Minimum: 8.5 deg (14.9%), Maximum: 16 deg (28.7%) | ↗ |
| Drilling Lights | Yes | ↗ |
| EPA Certification Family | Tier 4 Final (EU Stage V) | ↗ |
| Flow Indicator | Yes | ↗ |
| Fuel Tank | 128 gal | ↗ |
| Fuel Type | Ultra low sulfur diesel | ↗ |
| Gross Horsepower | 415 hp | ↗ |
| Height (Minimum Transport) | 136 in (344 cm) | ↗ |
| Idle Speed | 800 rpm | ↗ |
| Length (Minimum Transport) | 517 in (1,314 cm) | ↗ |
| Make and Model | Caterpillar C13 ACERT Tier 4 Final (EU Stage V) | ↗ |
| Max Fuel Consumption | 21.3 gph | ↗ |
| Maximum Carriage Speed at Maximum Engine RPM | 147 ft/min | ↗ |
| Maximum Carriage Speed in Low at Maximum Engine RPM | 42 ft/min | ↗ |
| Maximum Engine RPM | 2100 rpm | ↗ |
| Maximum Flow | 350 gpm | ↗ |
| Maximum Ground Drive Speed at Maximum Engine RPM | 1.9 mph | ↗ |
| Maximum Operating Angle (Fore/Aft)* | 30 deg | ↗ |
| Maximum Operating Angle (Left/Right)* | 30 deg | ↗ |
| Maximum Pressure | 1200 psi | ↗ |
| Maximum Spindle Speed (Low at Maximum Engine RPM) | 36 rpm | ↗ |
| Maximum Spindle Speed (Medium at Maximum Engine RPM) | 53 rpm | ↗ |
| Maximum Spindle Speed at Max Engine RPM | 97 rpm | ↗ |
| Maximum Spindle Torque (High at Maximum Engine RPM) | 16600 ft-lb | ↗ |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 52600 ft-lb | ↗ |
| Maximum Spindle Torque (Medium at Maximum Engine RPM) | 36200 ft-lb | ↗ |
| Minimum Bore Diameter | 6.1 in (15.5 cm) | ↗ |
| Noise Level at Operator's Ear | 85 dB(A) | ↗ |
| Pullback | 240,400 lbs (109,044 kg) | ↗ |
| Rated RPM | 2000 rpm | ↗ |
| Remote Lockout | Yes | ↗ |
| Stakedown System | Yes | ↗ |
| Strike Alert | Yes | ↗ |
| Thrust | 240,400 lbs (109,044 kg) | ↗ |
| Weight | 88,700 lbs (40,234 kg) | ↗ |
| Width (Minimum Transport) | 100 in (254 cm) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →