Vermeer
D24 HDD
Documents
Full specifications
| Angle of Approach | 18 deg | ↗ |
| Aspiration | Turbo | ↗ |
| Automated Rod Loader | Yes, now with Automated Rod Exchange | ↗ |
| Auxiliary Pump Flow at Maximum Engine RPM | 8 gpm | ↗ |
| Auxiliary Pump Relief Pressure | 2750 psi | ↗ |
| Brand | FMC | ↗ |
| Breakout System | Sliding, open side | ↗ |
| Continuous pullback | 22,000 lbs (9,979 kg) | ↗ |
| Continuous thrust | 22,000 lbs (9,979 kg) | ↗ |
| Cooling Method | Liquid | ↗ |
| Displacement | 220 cu-in | ↗ |
| Drill Rod Thread | #600 | ↗ |
| Drilling Lights | Standard | ↗ |
| Emissions rating | T4F/SV | ↗ |
| Flow Indicator | Standard | ↗ |
| Fuel Tank | 35 gal | ↗ |
| Fuel Type | Ultra low sulfur diesel | ↗ |
| Gross Horsepower | 100 hp | ↗ |
| Guaranteed sound power (CE-rating) | 100 dB(A) | ↗ |
| Height (Minimum Transport) | 89 in (226 cm) | ↗ |
| Height (With Cab) | 91.2 in (232 cm) | ↗ |
| Height with cab | 91.2 in (232 cm) | ↗ |
| Hydraulic Return Filter Rating | B1000 = 11 micron | ↗ |
| Hydraulic Supply Filter Rating | B1000 = 6 micron | ↗ |
| Hydraulic Tank | 25 gal | ↗ |
| Idle Speed | 1000 rpm | ↗ |
| Joint Inside Diameter | .9 in | ↗ |
| Joint Outside Diameter | 2.625 in (6.67 cm) | ↗ |
| Length | 10 ft (3.0 m) | ↗ |
| Length (Minimum Transport) | 224 in (569 cm) | ↗ |
| Make and Model | CAT C3.6 | ↗ |
| Max Fuel Consumption | 5 gph | ↗ |
| Max peak pullback | 24,700 lbs (11,204 kg) | ↗ |
| Max peak thrust | 24,700 lbs (11,204 kg) | ↗ |
| Maximum Carriage Speed at Maximum Engine RPM | 181 ft/min | ↗ |
| Maximum Carriage Speed in Low at Maximum Engine RPM | 90 ft/min | ↗ |
| Maximum Engine RPM | 2000 rpm | ↗ |
| Maximum Flow | 45 gpm | ↗ |
| Maximum Ground Drive Speed at Maximum Engine RPM | 3.3 mph | ↗ |
| Maximum Operating Angle (Fore/Aft)* | 35 deg | ↗ |
| Maximum Operating Angle (Left/Right)* | 35 deg | ↗ |
| Maximum Pressure | 900 psi | ↗ |
| Maximum Spindle Speed (Low at Maximum Engine RPM) | 99 rpm | ↗ |
| Maximum Spindle Speed (Medium at Maximum Engine RPM) | 132 rpm | ↗ |
| Maximum Spindle Speed at Max Engine RPM | 198 rpm | ↗ |
| Maximum Spindle Torque (High at Maximum Engine RPM) | 1460 ft-lb | ↗ |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 3080 ft-lb | ↗ |
| Maximum Spindle Torque (Medium at Maximum Engine RPM) | 2270 ft-lb | ↗ |
| Minimum Bend Radius | 108 ft (32.9 m) | ↗ |
| Minimum Bore Diameter | 4 in (10.2 cm) | ↗ |
| Noise Level at Operator's Ear | 72.6 dB(A) | ↗ |
| On Board Tank Capacity | 5 gal | ↗ |
| Operator Presence | Standard | ↗ |
| Pullback | 24,700 lbs (11,204 kg) | ↗ |
| Remote Lockout | Standard | ↗ |
| Rod Diameter | 2.375 in (6.03 cm) | ↗ |
| Rodbox capacity | 400 ft (122 m) | ↗ |
| Rotation Pump Flow at Maximum Engine RPM | 27 gpm | ↗ |
| Rotation Pump Relief Pressure | 5000 psi | ↗ |
| Stakedown System | Standard | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →