Vermeer
D60x90 S3 HDD
202 hp
Engine power
39,000 lb (17,690 kg)
Operating weight
53.3 m/min
max carriage speed
567 L/min
max drilling fluid flow
6.2 MPa
max drilling fluid pressure
12,204 Nm
max spindle torque
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Operating weight | max carriage speed |
|---|---|---|---|---|
| Ditch Witch HT220 | 93% | 215 hp | 42,990 lb (19,500 kg) | - |
| Ditch Witch AT60 All Terrain Directional Drill | 87% | 190 hp | 31,081 lb (14,098 kg) | - |
| Ditch Witch JT60 Directional Drill | 87% | 190 hp | 31,081 lb (14,098 kg) | - |
| Ditch Witch JT40 | 83% | 190 hp | 28,168 lb (12,777 kg) | - |
| Ditch Witch JT4020 | 83% | 190 hp | 28,168 lb (12,777 kg) | - |
| Ditch Witch JT100 | 80% | 260 hp | 47,770 lb (21,668 kg) | - |
Documents
Full specifications
| Angle of Approach | 18 deg | ↗ |
| Aspiration | Turbo Charged | ↗ |
| Automated Rod Loader | Yes | ↗ |
| Auxiliary Pump Flow at Maximum Engine RPM | 13.4 gpm | ↗ |
| Auxiliary Pump Relief Pressure | 3000 psi | ↗ |
| Brand | Kerr | ↗ |
| Breakout System | Open top Vise | ↗ |
| Cab | Standard | ↗ |
| Drilling Lights | Standard | ↗ |
| Flow Indicator | Standard | ↗ |
| Fuel Tank | 90 gal | ↗ |
| Fuel Type | Ultra Low Sulfur Diesel | ↗ |
| Gross Horsepower | 202 hp | ↗ |
| Height (Minimum Transport) | 104 in (264 cm) | ↗ |
| Height (With Cab) | 104 in (264 cm) | ↗ |
| Hydraulic System | 100 gal | ↗ |
| Hydraulic Tank | 75 gal | ↗ |
| Length (Minimum Transport) | 354 in (899 cm) | ↗ |
| Make and Model | Cat | ↗ |
| Maximum Carriage Speed at Maximum Engine RPM | 175 ft/min | ↗ |
| Maximum Carriage Speed in Low at Maximum Engine RPM | 55 ft/min | ↗ |
| Maximum Engine RPM | 2200 rpm | ↗ |
| Maximum Flow | 150 gpm | ↗ |
| Maximum Ground Drive Speed at Maximum Engine RPM | 3.7 mph | ↗ |
| Maximum Pressure | 900 psi | ↗ |
| Maximum Spindle Speed at Max Engine RPM | 200 rpm | ↗ |
| Maximum Spindle Torque (High at Maximum Engine RPM) | 3790 ft-lb | ↗ |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 9250 ft-lb | ↗ |
| Maximum Spindle Torque (Medium at Maximum Engine RPM) | 6810 ft-lb | ↗ |
| Minimum Bore Diameter | 6 in (15.2 cm) | ↗ |
| Noise Level at Operator's Ear | 83 dB(A) | ↗ |
| Operator Presence | Standard | ↗ |
| Pullback | 60,000 lbs (27,216 kg) | ↗ |
| Remote Lockout | Standard | ↗ |
| Rotation Pump Flow at Maximum Engine RPM | 55 gpm | ↗ |
| Rotation Pump Relief Pressure | 5800 psi | ↗ |
| Stakedown System | Two Options | ↗ |
| Strike Alert | Standard | ↗ |
| Thrust | 60,000 lbs (27,216 kg) | ↗ |
| Thrust/Pullback Pump Flow at Max Engine RPM | 41 gpm | ↗ |
| Thrust/Pullback Pump Relief Pressure | 5500 psi | ↗ |
| Weight | 42,150 lbs (19,119 kg) | ↗ |
| Width (Minimum Transport) | 90 in (229 cm) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →