Vermeer
TR5300 Trommel Screen
74 hp
Engine power
32,000 lb (14,515 kg)
Operating weight
36.0 in (91.5 cm)
conveyor belt width
5.2 ft (1.6 m)
drum diameter
15.1 ft (4.6 m)
drum length
24 rpm
drum speed
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Operating weight | conveyor belt width |
|---|---|---|---|---|
| Bobcat TR38160EVO | 87% | 99 hp | 30,203 lb (13,700 kg) | - |
| Bobcat TR50190EVO | 78% | 141 hp | 36,376 lb (16,500 kg) | - |
| Bobcat TR40250EVO | 76% | 139 hp | 38,669 lb (17,540 kg) | - |
| Bobcat TR50210EVO | 76% | 141 hp | 38,669 lb (17,540 kg) | - |
Documents
Full specifications
| Air Cleaner | Dual element | ↗ |
| Axle/Suspension | Single Leaf Sprung | ↗ |
| Battery | 950 Cold Cranking Amp Group 31 | ↗ |
| Bristle Material | Polyethylene | ↗ |
| Brush Assembly Support | Two 1.25" (3.2 cm) sealed ball bearings | ↗ |
| Brush Diameter | 14 in (35.6 cm) | ↗ |
| Capacity | 20,000 lbs (9,072 kg) | ↗ |
| Conveyor Belt Size | 36 | ↗ |
| Conveyor Belt Stacking Height | 6' | ↗ |
| Conveyor Belt Type | 220 lb, 2 ply, 3/16" x 1/16", R2 splice, Continuous option | ↗ |
| Conveyor Belt Width | 36 in (91.4 cm) | ↗ |
| Conveyor Motor Displacement | 33 cu-in | ↗ |
| Conveyor Operation | 17 gpm | ↗ |
| Drum Angle Adjustability | 0 -7 degrees | ↗ |
| Drum Diameter | 5 ft (1.5 m) | ↗ |
| Drum Drive Chain | 140 custom extended pin | ↗ |
| Drum Length | 15 ft (4.6 m) | ↗ |
| Drum Operation | 0-30.9 gpm (0-117.0 L/min) | ↗ |
| Drum Speed | 0 -24 RPM | ↗ |
| Drum Support Description | Eight poly trunnion rollers 8" (20.3 cm) diameter 4" (10.2 cm) width | ↗ |
| Engine Rating | 74 hp (55 kW) @ 2600 rpm and 181 ft-lb (245.4 Nm) of torque @ 1600 rpm | ↗ |
| Fines Conveyor Frame | 2" (5.1 cm) x 8" (20.3 cm) structural steel tubing | ↗ |
| Fines Conveyor Length | 55 ft (16.8 m) | ↗ |
| Frame Description | Heavy Duty Structural Tubing | ↗ |
| Fuel Consumption | 4.6 | ↗ |
| Fuel Tank Capacity | 44 gal | ↗ |
| Head Pulley Bearing | 2 7/16" (6.2 cm) pillow block | ↗ |
| Head Pulley Takeup | 10 in (25.4 cm) | ↗ |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide | ↗ |
| Hitch Weight | 11,600 lbs (5,262 kg) | ↗ |
| Hopper Bottom Width | 34 in (86.4 cm) | ↗ |
| Hopper Capacity | 5.5 cu yd | ↗ |
| Hopper Height | 9.5 | ↗ |
| Hopper Opening | 34 x37 | ↗ |
| Make and Model | Deutz TD2.9L Tier 4 Final/ Stage IV | ↗ |
| Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) | 30 deg | ↗ |
| Maximum Fines Belt Speed | 500 ft/min | ↗ |
| Maximum Screen Panels | 4 | ↗ |
| Maximum Variable Overs Belt Speed | 350 ft/min | ↗ |
| Number of Cylinders | 4 | ↗ |
| Oil Filter | Spin-on | ↗ |
| Oil Volume with Filter | 8.4 qt | ↗ |
| Operation Height | 15 ft (4.6 m) | ↗ |
| Operation Length | 89.9 ft (27.4 m) | ↗ |
| Operation Width | 113 in (287 cm) | ↗ |
| Overs Conveyor Length | 10.5 ft (3.2 m) | ↗ |
| Radiator Fan | Suction | ↗ |
| Recommended Oil | Mobil 15W40 | ↗ |
| Self-Cleaning Return Idlers | 4" (10.2 cm) rubber disc, qty 8 | ↗ |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft | ↗ |
| System Voltage | 12 | ↗ |
| Tank capacity | 55 gal | ↗ |
| Thrust Bearing Diameter | 4 in (10.2 cm) | ↗ |
| Thrust Bearing Face | 2.9 in (73.7 mm) | ↗ |
| Tires - Option One | 445 /50R22.5 | ↗ |
| Transport Height | 13.4 ft (4.1 m) | ↗ |
| Transport Length | 39 ft (11.9 m) | ↗ |
| Transport Width | 98.4 in (250 cm) | ↗ |
| Troughing Idler Type | 20° CEMA "B" with permanently sealed bearings | ↗ |
| Weight | 32,000 lbs (14,515 kg) | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →