Vermeer
TR6400 Trommel Screen
101 hp
Engine power
41,888 lb (19,000 kg)
Operating weight
134 cu m/hour
capacity
6.6 ft (2 m)
drum diameter
19.7 ft (6 m)
drum length
36.0 in (91.4 cm)
fines conveyor belt width
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Operating weight | capacity |
|---|---|---|---|---|
| Bobcat TR38160EVO | 85% | 99 hp | 30,203 lb (13,700 kg) | - |
| Bobcat TR40250EVO | 82% | 139 hp | 38,669 lb (17,540 kg) | - |
| Bobcat TR50210EVO | 82% | 141 hp | 38,669 lb (17,540 kg) | - |
| Bobcat TR50190EVO | 79% | 141 hp | 36,376 lb (16,500 kg) | - |
Documents
Full specifications
| Air Cleaner | Dual element | ↗ |
| Apron Conveyor Belt Width | 42 in (107 cm) | ↗ |
| Apron Conveyor Length | 12.4 ft (3.8 m) | ↗ |
| Apron Conveyor Rollers | 5 CEMA "D" x 17 in (12.7 x 43.2 cm) | ↗ |
| Apron Conveyor Speed | 0 -15 fpm | ↗ |
| Apron Opening Height | 45 in (114 cm) | ↗ |
| Apron Opening Width | 37.5 in (95.2 cm) | ↗ |
| Axle/Suspension | Leaf spring | ↗ |
| Battery | 950 CCA | ↗ |
| Bristle Material | Polyethylene | ↗ |
| Brush Assembly Support | Two 1.25 in (3.2 cm) sealed ball bearings/brush | ↗ |
| Brush Diameter | 14 in (35.6 cm) | ↗ |
| Capacity | Approximately 180 cu yd (137.6 cu m) per hour with 0.5 in (1.3 cm) screens installed and material with moisture less than 40% | ↗ |
| Collecting Conveyor Length | 16 ft (4.9 m) | ↗ |
| Conveyor Belt Size | 42 in (106.7 cm) | ↗ |
| Conveyor Belt Stacking Height | 9 ft (2.7 m) (conveyor @ 25 deg) | ↗ |
| Conveyor Belt Type | 220 lb (99.8 kg), 2 ply, 2/16 x 1/16 in (4.8 x 1.6 mm) cleated | ↗ |
| Conveyor Belt Width | 36 in (91.4 cm) | ↗ |
| Conveyor Motor Displacement | 14.2 cu-in | ↗ |
| Drum Angle Adjustability | 0 -5 deg | ↗ |
| Drum Diameter | 6.5 ft (2.0 m) | ↗ |
| Drum Drive Chain | 140 extended pin/extended width | ↗ |
| Drum Length | 20 ft (6.1 m) | ↗ |
| Drum Motor | 35.5 cu in (581.7 cu cm) displacement | ↗ |
| Drum Operation | 0-33.1 gpm (0-125.3 L/min) | ↗ |
| Drum Speed | 0 -25 rpm | ↗ |
| Drum Support Description | 8 polyurethane trunnion wheels on pivoting bogeys 8 od x 4 in wide (20.3 x 10.2 cm) | ↗ |
| Engine Rating | 100 hp (74.5 kW) | ↗ |
| Fines Conveyor Frame | Engineered structural frame | ↗ |
| Fines Conveyor Length | 23.5 ft (7.2 m) | ↗ |
| Frame Description | Four independent hydraulic jacklegs | ↗ |
| Fuel Consumption | 3 gph (11.4 L/h) | ↗ |
| Fuel Tank Capacity | 50 gal | ↗ |
| Head Pulley Bearing | 1.5 in (3.8 cm) pillow block | ↗ |
| Head Pulley Takeup | 8 in (20.3 cm) | ↗ |
| Head Pulley Type | 8 in (20.3 cm) crowned | ↗ |
| Head/Tail Pulley Type | 8 in (20.3 cm) crowned | ↗ |
| Hitch Weight | 4,200 lbs (1,905 kg) | ↗ |
| Hopper Bottom Width | 37.5 in (95.2 cm) | ↗ |
| Hopper Capacity | 6.5 cu yd | ↗ |
| Hopper Height | 9.5 ft (2.9 m) from ground level at operating incline | ↗ |
| Hopper Opening | 11.7 ft x 5.3 ft (3.57 m x 1.6 m) | ↗ |
| Idler Type | 4 in (10.2 cm) CEMA "B" straight | ↗ |
| Make and Model | Deutz 3.6L Tier 4F (Stage IV) | ↗ |
| Maximum Collecting Belt Speed | 360 ft/min | ↗ |
| Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) | 30 deg | ↗ |
| Maximum Fines Belt Speed | 400 ft/min | ↗ |
| Maximum Screen Panels | 8 | ↗ |
| Maximum Variable Overs Belt Speed | 360 ft/min | ↗ |
| Number of Cylinders | 4 | ↗ |
| Oil Filter | Spin-on | ↗ |
| Oil Volume with Filter | 10 qt | ↗ |
| Operation | 77.8 gpm @ 3000 psi (294.5 L/min @ 206.8 bar) | ↗ |
| Operation Height | 16.7 ft (5.1 m) | ↗ |
| Operation Length | 54 ft (16.5 m) | ↗ |
| Operation Width | 295 in (749 cm) | ↗ |
| Overs Conveyor Frame | Engineered structural frame | ↗ |
| Overs Conveyor Length | 19.2 ft (5.9 m) | ↗ |
| Radiator Fan | Suction | ↗ |
| Recommended Oil | Mobil 15W40 | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →