Vermeer
WC2500TX Whole Tree Chipper
599 hp
Engine power
200.0 gal
Fuel capacity
48,499 lb (21,999 kg)
Operating weight
0.6 bar
ground pressure
34.0 in (86.4 cm)
infeed roller width
27.0 in (68.6 cm)
max feed height
Equivalent across brands
Compare side by side →Comparable machines from other manufacturers, scored on normalised, manufacturer-sourced specs.
| Model | Match | Engine power | Fuel capacity | Operating weight |
|---|---|---|---|---|
| Morbark 1100 | 88% | 500 hp | 160.0 gal | 48,630 lb (22,058 kg) |
| Bandit 2590 (Towable) | 83% | 800 hp | - | 44,000 lb (19,958 kg) |
| Morbark 40/36 Drum Chipper | 82% | 700 hp | 300.0 gal | 52,501 lb (23,814 kg) |
| Morbark 4036 | 82% | 700 hp | 300.0 gal | 51,839 lb (23,514 kg) |
| Morbark 1200 | 80% | 700 hp | 300.0 gal | 55,620 lb (25,229 kg) |
| Morbark 1200XL | 80% | 700 hp | 300.0 gal | 55,620 lb (25,229 kg) |
Documents
Full specifications
| Adjustable Height Discharge Chute | No | ↗ |
| Air Cleaner | Two-stage direct flow | ↗ |
| Alternator | 100 | ↗ |
| Auto Reverse PSI | 3750 psi | ↗ |
| Battery | Group 8D 1400 CCA (dual) | ↗ |
| Bedknife - Number of Useable Edges | 2 | ↗ |
| Bedknife Material | Cold-formed low-carbon bar | ↗ |
| Bedknife Size | 34" wide | ↗ |
| Bedknife Thickness | 1.5 in (38.1 mm) | ↗ |
| Belt Idler/Tensioner | Slide engine | ↗ |
| Belt Type | 12 rib 5 V | ↗ |
| Bore | 5.4 in (13.7 cm) | ↗ |
| Bottom Replaceable Wear Plate | AR 400 | ↗ |
| Bottom Thickness | .1 in | ↗ |
| Brake Type | Air | ↗ |
| Chute Height | 194 in (494 cm) | ↗ |
| Clutch Drive Engagement | Hydraulic | ↗ |
| Clutch Type | PT Tech electronically controlled dry | ↗ |
| Controller | Danfoss MC-050 | ↗ |
| Coolant Capacity (Engine and Radiator) | 23 gal | ↗ |
| Cooling Medium | Liquid | ↗ |
| Deflector Thickness | .2 in | ↗ |
| Deluxe Gauges | No | ↗ |
| Diameter | 36 in (91.4 cm) | ↗ |
| Display | DP10 | ↗ |
| Down Deflector Angle | 90 deg | ↗ |
| Drive Displacement | 6.9 cu-in | ↗ |
| Drive Manufacturer | White | ↗ |
| Drive Motor | WS-series | ↗ |
| Drive Planetary | Auburn Model 9 | ↗ |
| Dynamic Capacity | 166,000 lbs (75,296 kg) | ↗ |
| Extended Warranty | Yes | ↗ |
| Fan | Reversible | ↗ |
| Feed Conveyor Type | Dual independent chain | ↗ |
| Feed Roller Distance to Drum | 1 in (25.4 mm) | ↗ |
| Feed Roller Down Pressure | 1530 | ↗ |
| Feed Roller Orientation | Horizontal | ↗ |
| Feed Roller Speed | 98 ft/min | ↗ |
| Feed Table Length - Option One | 10 ft (3.0 m) | ↗ |
| Feed Table Width | 98 in (249 cm) | ↗ |
| Filtration Method | Intake suction screens and return filter | ↗ |
| Fixture Method | Bolt | ↗ |
| Flow Control | Two - feed roller and infeed conveyor | ↗ |
| Frame Description | 8" x 4" x .375" wall rectangular tubing | ↗ |
| Fuel Tank Capacity | 200 gal | ↗ |
| Fuel Type | Ultra-low sulfur diesel | ↗ |
| Gross Horsepower (Maximum) | 600 hp | ↗ |
| Ground pressure | 8.4 psi | ↗ |
| Infeed Floor Construction | AR400 wear plate | ↗ |
| Infeed Roller Diameter | 28 in (71.1 cm) | ↗ |
| Infeed Roller Weight | 575 lbs (261 kg) | ↗ |
| Infeed Roller Width | 34 in (86.4 cm) | ↗ |
| Infeed Slope | 6 deg | ↗ |
| Knife Size | 8.5 or 17 | ↗ |
| Knife Thickness | .6 in | ↗ |
| Make and Model | Cummins QSX15 Tier 3 | ↗ |
| Manufacturer | Dodge | ↗ |
| Material | A8 chipper steel | ↗ |
| Material Capacity | 25 in (63.5 cm) | ↗ |
| Material Construction | .50" thick | ↗ |
Every figure is traced to the manufacturer’s published data. ↗ opens the source.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
Is this your equipment? Verify your specs →