Hilti
218 models - manufacturer-sourced specifications, datasheets and manuals.
| Model | Type | Key specs | Documents |
|---|---|---|---|
| 500 | |||
| CP620 | |||
| CP642 | |||
| CP672 | |||
| DD-160E | |||
| DD-400E | |||
| DD130 | |||
| DD200 | |||
| DX351 | |||
| DX460 | |||
| H00 | |||
| H01 | |||
| H02 | |||
| H03 | |||
| H04 | |||
| H05 | |||
| H06 | |||
| H07 | |||
| H08 | |||
| H09 | |||
| H10 | |||
| H11 | |||
| H12 | |||
| H13 | |||
| H14 | |||
| H15 | |||
| H16 | |||
| H17 | |||
| H18 | |||
| H19 | |||
| H20 | |||
| H21 | |||
| H22 | |||
| H23 | |||
| H24 | |||
| H25 | |||
| H26 | |||
| H27 | |||
| H28 | |||
| H29 | |||
| H30 | |||
| H31 | |||
| H32 | |||
| H33 | |||
| H34 | |||
| H35 | |||
| H36 | |||
| H37 | |||
| H38 | |||
| H39 | |||
| H40 | |||
| H41 | |||
| H42 | |||
| H43 | |||
| H44 | |||
| H45 | |||
| H46 | |||
| H47 | |||
| H48 | |||
| H49 | |||
| H50 | |||
| H51 | |||
| H52 | |||
| H53 | |||
| H54 | |||
| H55 | |||
| H56 | |||
| H57 | |||
| H58 | |||
| H59 | |||
| H60 | |||
| H61 | |||
| H62 | |||
| H63 | |||
| H64 | |||
| H65 | |||
| H66 | |||
| H67 | |||
| H68 | |||
| H69 | |||
| H70 | |||
| H71 | |||
| H72 | |||
| H73 | |||
| H74 | |||
| H75 | |||
| H76 | |||
| H77 | |||
| H78 | |||
| H79 | |||
| H80 | |||
| H81 | |||
| H82 | |||
| H83 | |||
| H84 | |||
| H85 | |||
| H86 | |||
| H87 | |||
| H88 | |||
| H89 | |||
| H90 | |||
| H91 | |||
| H92 | |||
| H93 | |||
| H94 | |||
| H95 | |||
| H96 | |||
| H97 | |||
| H98 | |||
| H99 | |||
| P138 | |||
| P160 | |||
| P165 | |||
| P167 | |||
| P17 | |||
| P170 | |||
| P174 | |||
| P18 | |||
| P19 | |||
| P56 | |||
| PD22 | |||
| PD28 | |||
| PM24 | |||
| PR16 | |||
| TE16-C | |||
| TE76-ATC | |||
| TE905 | |||
| WSC 7.25-S | 7.25 Inch Circular Saw | ||
| R4DW-X | Air Nailer | ||
| AG 30D-22 | Angle Grinder | ||
| AG 4D-22 | Angle Grinder | ||
| AG 4S-22 | Angle Grinder | ||
| AG 6D-22 | Angle Grinder | ||
| AG 6DD-22 | Angle Grinder | ||
| GTB 6X-22 | Belt Sander | ||
| GTB 6X-A22 | Belt Sander | ||
| TE 500-AVR | Chipping Hammer | Chuck Type TE-Y (SDS Max); Impact Rate 3510 impacts/min; Max. Chiseling Performance 1000 cm³/min | |
| DG 150 | Concrete Grinder | ||
| DGH 150 | Concrete Grinder | ||
| PS 1000 X-Scan | Concrete Scanner | Data Memory 200 scans; Depth Accuracy ±10 mm (<100 mm), ±15% (>100 mm); Localization Accuracy ±10 mm | |
| TE 500-22 | Cordless Chipping Hammer | ||
| SC 30WR-22 | Cordless Circular Saw | ||
| SC 4MR-22 | Cordless Circular Saw | ||
| SC 6WL-22 | Cordless Circular Saw | ||
| DGH 130-22 | Cordless Concrete Grinder | ||
| BX 3-ME-22 | Cordless Concrete Nailer | ||
| BX 4-IF-22 | Cordless Concrete Nailer | ||
| BX 4-ME-22 | Cordless Concrete Nailer | ||
| SB 6-22 | Cordless Deep Cut Band Saw | ||
| SB 6S-22 | Cordless Deep Cut Band Saw | ||
| TE 1000-22 | Cordless Demolition Hammer | ||
| BX 3-BT (02) | Cordless Fastening Tool | ||
| TE 2000-22 | Cordless Jackhammer | ||
| TE 3000-22 | Cordless Jackhammer | ||
| SC 6ML-22 | Cordless Metal Circular Saw | ||
| SM 60-22 | Cordless Miter Saw | ||
| SC 30WL-22 | Cordless Worm Drive Circular Saw | ||
| DD 110-U-22 | Core Drill | ||
| DD 110-W | Core Drill | Drilling Diameter Range 5/8 - 6-3/8 in; RPM (Gear 1) 740 rpm; RPM (Gear 2) 1580 rpm | |
| DD 120 | Core Drill | ||
| DD 150-U | Core Drill | ||
| DD 160-22 | Core Drill | ||
| DD 250-CA | Core Drill | Drilling Diameter Range 15/32 - 19-11/16 in; Number of Gears 4; Rated Input Power 3200 W | |
| DD 30-W | Core Drill | ||
| DD 350-CA | Core Drill | ||
| DD 500-CA | Core Drill | Drilling Diameter Range 3-7/32 - 23-5/8 in; Number of Gears 10; Rated Input Power 6000 W | |
| TE 500 SDS-Max | Demolition Hammer | ||
| TE 800-AVR | Demolition Hammer | Chuck Type TE-S; Impact Rate 1890 impacts/min; Max. Chiseling Performance 2500 cm³/min | |
| VC 150-10 X | Dust Extractor | Airflow 82.64 ft³/min; Max. Vacuum 3.23 psi; Supply Cord Length 275.59 in | |
| DCH 230 | Electric Cutter | ||
| DCH 300-X | Electric Cutter | ||
| TE 1000-AVR | Electric Demolition Hammer | ||
| TE 600-AVR | Electric Demolition Hammer | ||
| TE 700-AVR | Electric Demolition Hammer | ||
| TE 2000-AVR | Electric Jackhammer | Chuck Type TE-S; Impact Rate 1800 impacts/min; Max. Chiseling Performance 14200 cm³/min | |
| TE 3000-AVR | Electric Jackhammer | Chuck Type TE-H (Hilti HEX 28); Impact Rate 858 impacts/min; Max. Chiseling Performance 60000 cm³/min | |
| DSH 600-X | Gas Cut-Off Saw | Blade Diameter 12 in; Cutting Depth 5 in; Engine Displacement 63.3 cm³ | |
| DSH 700-X | Gas Cut-Off Saw | Blade Diameter 14 in; Engine Displacement 87 cm³; Fuel Mix Ratio 50:1 | |
| DSH 900-X | Gas Cut-Off Saw | Blade Diameter 16 in; Cutting Depth 6 in; Engine Displacement 87 cm³ | |
| GX 2 | Gas-Actuated Fastening Tool | ||
| GX 3 | Gas-Actuated Fastening Tool | ||
| GX-IE | Gas-Actuated Insulation Nailer | ||
| DWS 225 | Hand Sander | ||
| DSH 600-22 ATC | Hand-Held Cut-Off Saw | ||
| DSH 700-22 ATC | Hand-Held Cut-Off Saw | ||
| DSH 900-22 ATC | Hand-Held Cut-Off Saw | ||
| PD-E | Laser Distance Meter | Battery Type 2 x 1.5V (AAA); IP Protection Class IP 65; Laser Class Class 2 | |
| PM 2-L | Laser Level | ||
| PM 30-MG | Laser Level | ||
| PR 30-HVSG A12 | Laser Level | ||
| PR 300-HV2S | Laser Level | ||
| PR 4-22 | Laser Level | ||
| PR 400-22 | Laser Level | ||
| DX 462 HM | Metal Stamping Tool | ||
| PM 40-MG | Multi-Line Laser | Accuracy ±0.08 in at 33 ft; Battery Life 1.5 days; IP Protection Class IP 54 | |
| DX 9-ENP | Powder-Actuated Decking Tool | ||
| DX 9-HSN | Powder-Actuated Decking Tool | ||
| DX 6-GR | Powder-Actuated Grating Nailer | ||
| DX 6-IE | Powder-Actuated Insulation Fastening Nailer | ||
| DX 6 MX | Powder-Actuated Nailer | ||
| DX 6-F10 | Powder-Actuated Nailer | ||
| DX 6-F8 | Powder-Actuated Nailer | ||
| DX 2 | Powder-Actuated Tool | ||
| DX 5-SM | Powder-Actuated Tool | ||
| DX 600-N | Powder-Actuated Tool | ||
| DX 76 | Powder-Actuated Tool | ||
| TE 30-AVR | Rotary Hammer | Chuck Type TE-C (SDS-Plus); Hammer Drilling RPM 1100 rpm; Hammer Drilling Range 13/32 - 1-3/32 in | |
| TE 60-AVR | Rotary Hammer | Chuck Type TE-Y (SDS Max); Hammer Drilling Diameter Range 15/32 - 3-15/16 in; Hammer Drilling RPM 340 rpm | |
| TE 70-ATC/AVR | Rotary Hammer | Hammer Drilling Diameter Range 15/32 - 5-29/32 in; Hammer Drilling RPM 245 rpm; Impact Rate 2830 impacts/min | |
| TE 70-AVR | Rotary Hammer | Chuck Type TE-Y (SDS Max); Hammer Drilling Diameter Range 15/32 - 5-29/32 in; Hammer Drilling RPM 360 rpm | |
| PR 40-22 | Rotating Laser Level | Accuracy ±0.06 in at 100 ft; Detection Range 800 m; IP Protection Rating IP 66 | |
| BX 3-SCT | Sprayed Concrete Testing Tool | ||
| FX 3-A | Stud Fusion Machine | ||
| FX 3-KIT | Stud Fusion Starter Kit | ||
| SL 2-A22 | Work Light | ||
| SL 4-22 | Work Light | ||
| SL 6-22 | Work Light | ||
| SL 6-A22 | Work Light |