← Drilling Tools

Rotary Hammer

A rotary hammer is a percussive drill that combines rotation with a piston-driven hammering action to bore concrete, block, and stone. It is the standard tool for anchor holes and through-penetrations in masonry.

282

Modelos

4.0–38.4 lb (1.8–17.4 kg)

Operating weight

Marcas

Cómo funciona

An electro-pneumatic piston compresses an air cushion that slams a striker against the bit many times per second while the SDS shank lets the bit slide axially under each blow. The carbide tip fractures the concrete and the flutes rotate the dust out of the hole. Most models offer drill-only, hammer-drill, and chisel-only modes, so the same tool also handles light chipping.

Tipos y variantes

SDS-Plus rotary hammers: Compact models for anchor holes up to about 1 in diameter.
SDS-Max rotary hammers: Larger machines driving bits in the 1-2 in range and heavier chisels.
Cordless rotary hammers: Battery versions of both shank systems for work away from power.
Combination hammers: Units with a dedicated chipping mode for scaling, chasing, and small demolition.

Especificaciones clave

Especificación	Rango típico	Qué significa
Operating weight	4.0–38.4 lb (1.8–17.4 kg)	Weight tracks impact energy; heavy machines drill large holes fast but fatigue the operator.
Solid-bit capacity	1.125-1.875 in carbide	The largest solid carbide bit the tool drives efficiently in concrete.
Core-bit capacity	up to 6 in	Thin-wall core bits extend the machine to large penetrations for pipe and duct.
Power supply	120 V, 15 A	Corded models draw a full standard circuit under load.

Cómo la industria lo dimensiona

The class is banded by bit diameter. Machines in the 0-1 in band cover anchors, dowels, and conduit fastening with one-hand control; 1-2 in machines take over for large anchors, through-holes, and core work, at two or three times the weight.

Aplicaciones

Drilling anchor and dowel holes in slabs, walls, and footings
Through-penetrations for conduit, pipe, and duct in concrete and block
Setting adhesive and mechanical anchors for railings and equipment
Light chipping, tile removal, and chasing in chisel mode

Seguridad y operación

Concrete drilling generates respirable silica; dust-extraction shrouds or wet methods are required under OSHA Table 1.
Percussive tools transmit hand-arm vibration; low-vibration models and work rotation limit HAVS exposure.
A jammed bit spins the tool body hard; the side handle must be fitted and the clutch function verified.

Normas y certificaciones

OSHA · 29 CFR 1926.1153: Table 1 specifies dust controls for hammer drilling in concrete.
OSHA · 29 CFR 1926.302(a): Electric tool safety requirements for corded models.

Preguntas frecuentes

Rotary hammer or hammer drill?

A hammer drill vibrates its chuck mechanically and suits occasional small holes; a rotary hammer's piston mechanism strikes far harder and is the right tool for regular concrete work.

What is the difference between SDS-Plus and SDS-Max?

Shank size and machine class. SDS-Plus covers compact hammers and bits to about 1 in; SDS-Max shanks fit larger machines drilling 1-2 in holes and running heavy chisels.

Can a rotary hammer drill wood or steel?

Yes, in drill-only mode with a chuck adapter, though a standard drill does that work better. Hammer mode is for masonry only.