CAT CLASS: HQ-10415

Up to 0.5 gpm Airless Paint Sprayer

Up to 0.5 gpm airless paint sprayers represent the entry point on the airless sprayer ladder, designed for single-gun residential interior and small commercial applications. These units deliver between 0.3 and 0.5 gallons per minute, supporting work on walls, trim, and fences where portability and simplicity matter more than production speed. For higher-volume work or multiple operators, the 0.5-1 gpm class offers greater throughput.

Modelos

Marcas

Cat classes

Elija una clase de tamaño — la capacidad y el alcance varían en la gama.

Especificaciones clave

Especificación	Rango típico	Qué significa
Maximum delivery	0.3–0.5 gpm	Output supports one spray gun on typical coatings
Gun configuration	Single gun	Flow rate designed for one operator at a time
Application scope	Residential interiors, small commercial	Matched to room-by-room or single-structure work

Cómo elegir

This size class suits single-operator work on residential interiors, trim, and small commercial structures where mobility and ease of setup outweigh production speed. The 0.3–0.5 gpm delivery handles latex paints, primers, and stains on walls, ceilings, trim, and fencing without the weight or complexity of larger units. When work scales to larger commercial interiors, multiple rooms in sequence, or multi-story exteriors, the 0.5-1 gpm Airless Paint Sprayer provides faster coverage and supports longer continuous runs without refilling.

Lo que maneja este tamaño

Repainting interior walls and ceilings in a single-family home
Applying primer and finish coats to door and window trim
Staining or painting residential wood fencing sections
Small commercial storefront interiors and office repaint projects
Touch-up and maintenance painting on multi-unit residential buildings

Seguridad y operación

High-pressure output capable of injecting paint through skin; trigger discipline and appropriate gloves required
Pressure relief and filter cleaning performed only after unit is depressurized and disconnected from power
Adequate ventilation and respiratory protection needed when spraying solvent-based coatings indoors
Overspray containment with drop cloths or masking to protect adjacent surfaces and furnishings

Transporte y logística

Hand-carried or rolled on integrated wheels to job site
Fits in pickup beds, vans, or car trunks alongside ladders and paint supplies
No trailer or special vehicle required for typical residential access

Alimentación

Standard 120V AC household outlet, 15-amp circuit typical
Extension cords to 100 feet support work away from power sources
No generator required for most residential and light commercial sites

Preguntas frecuentes

What distinguishes this class from the 0.5-1 gpm size?

The up to 0.5 gpm class delivers lower flow, making it lighter and more portable but slower on large-area coverage. The 0.5-1 gpm band supports faster production on bigger interiors or continuous exterior work.

Can this size handle unthinned latex paint?

Most models in this class atomize unthinned latex paints and primers, though tip selection and coating viscosity determine finish quality. Thicker elastomerics or heavy-bodied coatings may exceed the pressure or flow capacity of entry-level units.

How many square feet per hour does this size typically cover?

Coverage depends on coating type, surface texture, and tip size, but 0.3–0.5 gpm output generally supports 150–300 square feet per hour on smooth to moderately textured surfaces with adequate operator technique.