CAT CLASS: HQ-10655

50+ ft Towable Boom Lift

The 50+ ft towable boom lift class represents the tallest units designed for light-duty vehicle towing, reaching working heights from 50 to just over 61 feet. These are the largest machines in the towable category, offering maximum reach while preserving trailer-rated mobility for jobs where full-size truck-mounted or trailer-delivered scissor lifts are impractical. All models in this band share 227 kg (500 lb) platform capacity and retain Department of Transportation trailer compliance for towing behind 3/4-ton pickup trucks.

Modelos

Marcas

Cat classes

Elija una clase de tamaño — la capacidad y el alcance varían en la gama.

Especificaciones clave

Especificación	Rango típico	Qué significa
Working height	50–61 ft (15.2–18.6 m)	Maximum safe reach for operators at this class ceiling; the defining range separating this band from smaller towables.
Platform capacity	227 kg (500 lb)	Standard load rating across all 50+ ft towables, accommodating one or two operators with hand tools.

Cómo elegir

This size class is appropriate when work demands reach above 50 feet but site logistics favor direct towing over dedicated delivery. The 40-50 ft Towable Boom Lift is the better choice for jobs with working heights comfortably under 50 feet, offering easier maneuverability and setup on congested sites. No larger towable class exists above 50+ ft; projects requiring greater height must step up to trailer-delivered articulating or telescopic boom lifts with dedicated transport.

Lo que maneja este tamaño

Installing signage or lighting on three- to five-story commercial facades
Exterior painting and cladding work on mid-rise buildings where truck access is limited
Tree trimming and utility line clearance up to 60 feet
Inspection and maintenance of tall warehouse or industrial facility exteriors
Installing or servicing rooftop equipment on commercial structures
Event rigging and installation for outdoor festivals or temporary structures

Seguridad y operación

Ground conditions and slope limits are critical; maximum reach magnifies tip-over risk on soft or uneven terrain
Outrigger deployment and leveling procedures must be verified before raising the boom to working height
Wind load becomes significant above 50 feet; manufacturer wind-speed limits govern safe operation
Operators must account for overhead clearances during towing and verify that boom stow positions clear highway obstacles

Transporte y logística

Designed for towing behind 3/4-ton pickup trucks with standard trailer hitches and seven-pin electrical connections
Complies with Department of Transportation trailer regulations in most jurisdictions without commercial driver's license requirements
Requires adequate trailer brake controllers and mirrors for safe highway towing at gross weights near or above 1,500 kg

Alimentación

Dual-fuel (gasoline and battery electric) powertrains common, allowing operation in noise-restricted or indoor-adjacent environments
Gasoline engines provide extended outdoor runtime without recharging infrastructure
Battery-powered modes eliminate emissions for work near building air intakes or occupied spaces

Preguntas frecuentes

What distinguishes a 50+ ft towable from a smaller towable boom lift?

Working height above 50 feet defines this class. All models maintain 227 kg platform capacity and trailer compliance, but the extended reach requires more careful outrigger setup and wind monitoring than 40–50 ft units.

Can 50+ ft towables operate on standard construction sites?

Yes, provided the ground is level, firm, and free of subsurface voids. The taller boom amplifies ground-condition sensitivity, so operators often need timber outrigger pads or steel plates on asphalt, soil, or uncompacted fill.

Why choose a towable over a trailer-delivered boom lift for tall work?

Towables eliminate delivery scheduling and truck fees when the towing vehicle is already on site. For jobs under 61 feet with adequate tow capacity available, towables reduce mobilization time and cost compared to waiting for dedicated transport.

Comparar modelos populares

Buscar por especificación →

Normalizado a las mismas unidades. Un guion significa que el valor no fue publicado.

Modelo	Altura de trabajo	Capacidad de plataforma
JLG ET500J	50 ft (15.2 m)	500 lb (227 kg)
Haulotte HTA16 P	51 ft (15.5 m)	500 lb (227 kg)
Haulotte HTA19 P	61.3 ft (18.7 m)	500 lb (227 kg)
JLG T500J	50 ft (15.2 m)	500 lb (227 kg)