CAT CLASS: HQ-10750

500+ W Work Light

The 500+ W Work Light band comprises high-output fixtures delivering 500 to 1,500 watts, designed to illuminate entire floors, large bays, or multi-story facades with a single unit. These lights sit at the top of the work light ladder, above the 150-500 W category, and represent the most powerful portable or semi-permanent fixtures used in construction, industrial, and entertainment lighting. Typical applications include area lighting for concrete pours, tower crane yards, and film production.

135

Modelos

Marcas

Cat classes

Elija una clase de tamaño: la capacidad y el alcance varían en la gama.

Especificaciones clave

Especificación	Rango típico	Qué significa
Wattage	500-1,500 W	Power output determining coverage area and lux at distance; higher wattages serve larger zones or greater throw distances.
Lamp type	HMI, halogen, or LED array	High-intensity discharge (HMI) and halogen deliver maximum output; LED arrays offer efficiency and lower heat.
Beam spread	Flood or adjustable spot	Flood configurations cover wide areas; spot focus extends reach for tall structures or distant targets.
Mounting	Tripod, yoke, or fixed bracket	Tripod mounts permit rapid repositioning; yoke and fixed brackets suit semi-permanent installations on trusses or scaffolding.

Cómo elegir

This size class is appropriate when a single fixture must cover an entire work floor, a construction bay measuring several hundred square meters, or a tall facade requiring long-throw output. The 500+ W band excels in applications where lower-wattage units would require multiple fixtures or fail to achieve the necessary lux at distance. For smaller zones, individual workstations, confined interiors, or applications under 100 square meters, the 150-500 W Work Light band offers more efficient coverage and lower power demands. Projects requiring uniform illumination over very large areas may deploy multiple 500+ W units rather than stepping down.

Lo que maneja este tamaño

Lighting a 500+ m² concrete slab pour through the night shift
Illuminating a multi-story building facade for masonry or cladding work
Providing area lighting for tower crane yards and material laydown zones
Backlighting large sets or exterior scenes in film and commercial production
High-bay warehouse fit-outs where overhead temporary lighting is impractical
Emergency nighttime repair zones requiring maximum visibility over large footprints

Seguridad y operación

High surface temperatures on halogen and HMI housings present burn hazards; maintain clearance from combustible materials and personnel
Lamp failure in HMI fixtures can cause envelope rupture; use protective guards and follow manufacturer hot-restrike intervals
Secure mounting critical due to fixture weight and wind loading; verify tripod spread locks and yoke fasteners before energizing
Electrical circuits must be protected by appropriate overcurrent devices and ground-fault protection in wet or outdoor environments

Transporte y logística

Individual fixtures typically handled by one or two workers; larger HMI units may exceed 20 kg and require two-person lifts
Transported in protective road cases or on pallets; ballasts for HMI lamps add significant weight and volume
Pickup trucks or cargo vans accommodate small quantities; larger deployments use box trucks or equipment trailers

Alimentación

Requires 120 V or 240 V single-phase circuits; 1,000+ W units often demand 240 V to avoid exceeding 15 A breaker limits
HMI fixtures require separate electronic ballasts; LED arrays may include integrated drivers or external power supplies
Generator capacity must account for inrush current on HMI ignition, often 2-3× steady-state draw

Preguntas frecuentes

What coverage area does a 1,000 W work light provide?

A 1,000 W flood-configured unit typically delivers 50-100 lux over 300-500 m² at mounting heights of 3-5 meters, depending on lamp type and reflector design. Spot configurations extend reach but narrow the illuminated zone.

Can 500+ W work lights operate on standard 120 V circuits?

Units up to approximately 1,200 W can run on 120 V 15 A circuits, though 240 V is preferred for 1,000+ W fixtures to reduce current draw and voltage drop. Always verify circuit capacity and breaker rating before connection.

How do HMI and LED units compare at this wattage?

HMI lamps deliver higher luminous efficacy (80-100 lm/W) and superior color rendering for film work, but require warm-up time and ballasts. LED arrays offer instant-on, lower heat, and comparable output per watt, with broader adoption in construction applications.