Catalog / Storage Containers, Site Support, and Mobile Offices / Tanks and Liquid Storage / Water Tank
Baker Tank
21K F.A. Round Bottom Manifold Tank
500 gal
Capacidad de carga
47 ft (14.3 m)
Altura máx
Equivalentes entre marcas
Comparar lado a lado →Máquinas comparables de otros fabricantes, evaluadas sobre especificaciones normalizadas de los fabricantes.
| Modelo | Coincidencia | Capacidad de carga | Altura máx |
|---|---|---|---|
| Chem-Tainer TC5674LC: 500 Gallon Round Horizontal Bulk Storage Tank | 57% | 500 gal | 6.2 ft (1.9 m) |
| Den Hartog HZ0500-48 | 57% | 500 gal | 6.6 ft (2.0 m) |
| Plastic-Mart Norwesco 500 Gallon Doorway Water Storage Tank (N-43616) | 56% | 500 gal | 5.8 ft (1.8 m) |
| Norwesco Applicator Tank 500 gal | 55% | 500 gal | 4.2 ft (1.3 m) |
| Norwesco Elliptical Tank 500 gal | 54% | 500 gal | 3.7 ft (1.1 m) |
| Plastic-Mart Norwesco 500 Gallon One Compartment Septic Tank Low Profile (N-43522) | 54% | 500 gal | 3.5 ft (1.1 m) |
Documentos
Especificaciones completas
| Axles | 25K axle, automatic slack adjusters, top mounted 30 service chambers, outboard drums | ↗ |
| Capacity | 500 BBL (21,000 gallons) BBL / gal | ↗ |
| Exterior Coating | High gloss polyurethane paint | ↗ |
| Fill Line | 3" pipe, top of tank, with cap and chain | ↗ |
| Floor | 1/4" thick ASTM A36 carbon steel round bottom | ↗ |
| Front Drain | 4"-150# flanged connection with butterfly valve | ↗ |
| Front Inlet | 8" connection, flanged on the inside and outside of the tank | ↗ |
| Height | 10'-8" grade to roof plate; 13'-4" grade to upright guardrail ft-in | ↗ |
| Interior Lining | Chemical resistant lining | ↗ |
| Length | 47'-2" nose to tail; 42'-11" end wall to end wall ft-in | ↗ |
| Rear Drain | 4"-150# flanged connection with butterfly valve and remote operation handle | ↗ |
| Relief Valve | 16 oz/in² pressure setting, 0.4 oz/in² vacuum setting; Buna-N seal | ↗ |
| Roof Frame | 3" wide x 1½" tall channel-shaped steel (on exterior side of roof deck) | ↗ |
| Sides/Ends | 1/4" thick ASTM A36 carbon steel | ↗ |
| Tires | 11.00 x 22.5 (nylon tubeless) | ↗ |
| Top Deck | 1/4" thick ASTM A36 carbon steel | ↗ |
| Top Manway | One - 21½" I.D. domed lid w/anti-personnel bars, slotted hinges and 5 - 3/4" T or eye bolt with wing nut fasteners; Buna-N (NBR) gasket | ↗ |
| Valves | 2-Front & 1-Rear: 4" wafer butterfly valve; Cast iron body, Buna-N seat & seals, 416 SS stem, Nylon 11 coated ductile iron disk | ↗ |
| Wall Frame | 6" wide channel-shaped steel (on exterior side of walls) | ↗ |
| Weight | 29,000 lbs (est.) | ↗ |
| Width | 8'-6" ft-in | ↗ |
Cada valor se rastrea hasta los datos publicados por el fabricante. ↗ abre la fuente.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
¿Es su equipo? Verifique sus specs →