Mitsubishi
OPBL10P with EasyLift
5.4 ft (1.6 m)
Altura de elevación
2,205 lb (1,000 kg)
Capacidad de carga
Equivalentes entre marcas
Comparar lado a lado →Máquinas comparables de otros fabricantes, evaluadas sobre especificaciones normalizadas de los fabricantes.
| Modelo | Coincidencia | Altura de elevación | Capacidad de carga |
|---|---|---|---|
| Vestil SL-63-AA | 94% | 5.2 ft (1.6 m) | 2,000 lb (907 kg) |
| Vestil S-62-AA | 93% | 5.2 ft (1.6 m) | 2,000 lb (907 kg) |
| Raymond 8530 Rider Stacker | 89% | 6 ft (1.8 m) | 2,500 lb (1,134 kg) |
| Jungheinrich EKS 110 | 79% | 9.2 ft (2.8 m) | 2,205 lb (1,000 kg) |
| Noblelift FE3R20N | 73% | 9.8 ft (3.0 m) | 2,000 lb (907 kg) |
| Vestil SL-118-AA | 73% | 9.8 ft (3.0 m) | 2,000 lb (907 kg) |
Documentos
Especificaciones completas
| Acceleration time (10 metres) with/without load | 5.5 / 4.8 s | ↗ |
| Axle loading with maximum load, front/rear (simplex mast, lowest lift height) | 480 / 2170 kg | ↗ |
| Axle loading without load, front/rear (simplex mast, lowest lift height) | 990 / 660 kg | ↗ |
| Battery to DIN 43 531/35/36 A/B/C/no | BS | ↗ |
| Battery voltage/capacity at 5-hour discharge | 24 / 600 V/Ah | ↗ |
| Battery weight | 992–1,102 lb (450–500 kg) | ↗ |
| Drive motor capacity (60 min. short duty) | 2.7 kW | ↗ |
| Fork carriage width | 22.0 in (560 mm) | ↗ |
| Fork dimensions (thickness, width, length) | 70 / 147 / 1150 mm | ↗ |
| Fork height, fully lowered | 3.5 in (90 mm) | ↗ |
| Ground clearance at centre of wheelbase, with load (forks lowered) | 1.4 in (35 mm) | ↗ |
| Height | 89.6 in (2,276 mm) | ↗ |
| Height of support legs | 115 | ↗ |
| Height of the drivers's platform | 70.9 in (1,800 mm) | ↗ |
| Height to top of overhead guard | 90.6 in (2,300 mm) | ↗ |
| Height with mast extended | 149 in (3,790 mm) | ↗ |
| Length to fork face (includes fork thickness) | 65.9 in (1,675 mm) | ↗ |
| Lift height (see tables) | 64.6 in (1,640 mm) | ↗ |
| Lift motor output at 15% duty factor | 2.2 (5%) kW | ↗ |
| Lifting speed, with/without load | 0.11 / 0.19 m/s | ↗ |
| Load capacity | 2,205 lb (1,000 kg) | ↗ |
| Load centre distance | 23.6 in (600 mm) | ↗ |
| Load distance, axle to fork face (forks lowered) | 4.7 in (120 mm) | ↗ |
| Lowering speed, with/without load | 0.24 / 0.22 m/s | ↗ |
| Manufacturer's model designation | OPBL10P with EasyLift | ↗ |
| Maximum gradeability, with/without load | 10.2 s | ↗ |
| Operator type: pedestrian, (operator)-standing, -seated | Stand-on | ↗ |
| Outside width over forks (minimum/maximum) | 17.7–27.6 in (450–700 mm) | ↗ |
| Overall length | 111 in (2,825 mm) | ↗ |
| Overall width | 31.9 in (810 mm) | ↗ |
| Power source: (battery, diesel, LP gas, petrol) | Battery | ↗ |
| Seat height | 6.3–70.9 in (160–1,800 mm) | ↗ |
| Service brakes (mechanical /hydraulic /electric /pneumatic) | Regenerative and electrical | ↗ |
| Sound pressure level at the driver's seat | 57 dB (A) | ↗ |
| Supplementary lift | 28.5 in (723 mm) | ↗ |
| Track width (center of tyres), load side | 26.5 in (674 mm) | ↗ |
| Transfer aisle width (pallet 1000 × 1200 mm lengthwise & 200 mm clearance) | Platform/load width + 90 mm clearance each side | ↗ |
| Travel speed, with/without load | 9/9 km/h | ↗ |
| Truck weight without load, with maximum battery weight | 5,842 lb (2,650 kg) | ↗ |
| Turning circle radius | 61.8 in (1,570 mm) | ↗ |
| Type of drive control | AC Traction | ↗ |
| Tyre dimensions, front | 250 × 105 | ↗ |
| Tyre dimensions, rear | 120 × 115 | ↗ |
| Tyres: V=solid, L=pneumatic, SE=solid pneumatic - front/rear | Vul/Vul | ↗ |
| Wheelbase | 54.0 in (1,371 mm) | ↗ |
| Working aisle width (Ast) with 1000 × 1200 mm pallets, load crosswise, platform up/down | Platform/load width + 90 mm clearance each side | ↗ |
| Working aisle width (Ast) with 800 × 1200 mm pallets, load lengthwise, platform up/down | 124 in (3,150 mm) | ↗ |
Cada valor se rastrea hasta los datos publicados por el fabricante. ↗ abre la fuente.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
¿Es su equipo? Verifique sus specs →