Vermeer
SC802 Stump Cutter
74 hp
Potencia del motor
25.0 gal
Capacidad de combustible
4,400 lb (1,996 kg)
Peso operativo
1.9 cu m
chip containment capacity
28.0 in (71.1 cm)
cutter wheel diameter
25 in (63.5 cm)
cutting depth
Equivalentes entre marcas
Comparar lado a lado →Máquinas comparables de otros fabricantes, evaluadas sobre especificaciones normalizadas de los fabricantes.
| Modelo | Coincidencia | Potencia del motor | Capacidad de combustible | Peso operativo |
|---|---|---|---|---|
| Bandit SG-75W | 99% | 74 hp | - | 4,321 lb (1,960 kg) |
| Bandit Model 3100 (Towable) | 90% | 74 hp | - | 5,461 lb (2,477 kg) |
| Bandit Model 2900 (Track) | 72% | 120 hp | - | 5,320 lb (2,413 kg) |
| Bandit Model 2550 (Track) | 59% | 49 hp | - | 2,560 lb (1,161 kg) |
| Bandit Model 2550 (Rubber Tire) | 53% | 49 hp | - | 2,280 lb (1,034 kg) |
| Toro STX-38 Stump Grinder | 46% | 38 hp | - | 1,750 lb (794 kg) |
Documentos
Especificaciones completas
| Air Cleaner | Dry-type with precleaner, restriction indicator, evacuator valve and safety element | ↗ |
| Alternator | 95 amp | ↗ |
| Axle/Suspension | Rubber torsional axle | ↗ |
| Battery | 950 | ↗ |
| Brake Type | Self-adjusting 12" x 2" (30.5 x 5.1 cm) electric with breakaway switch, max. total capacity 6000 lb (2721.6 kg) | ↗ |
| Capacity - Option One | 6000 | ↗ |
| Chip Containment | 68 cu ft | ↗ |
| Clutch Type | Electric clutch with brake | ↗ |
| Control Station Description | Swing-out | ↗ |
| Controller | Operation with AutoSweep | ↗ |
| Cooling Medium | Air-cooled head, oil-cooled block | ↗ |
| Cutterwheel Cut Above Ground | 35 in (88.9 cm) | ↗ |
| Cutterwheel Cut Below Ground | 25 in (63.5 cm) | ↗ |
| Cutterwheel Diameter | 28 in (71.1 cm) | ↗ |
| Cutterwheel Guard | Standard | ↗ |
| Cutterwheel Speed | 881 rpm | ↗ |
| Cutterwheel Straight Line Dimension | 96 in (244 cm) | ↗ |
| Cutterwheel Thickness | .9 in | ↗ |
| Directional Control | Yes | ↗ |
| Display | Multifunction Display (MFD) | ↗ |
| Driveshaft | Rubber dampened with 2 universal joints | ↗ |
| Driveshaft - U Joints | Two standard with double lip seal | ↗ |
| Extended Warranty | Optional | ↗ |
| Fender Description | Weld-on | ↗ |
| Filtration Method | 6 micron full flow return filter; suction strainer | ↗ |
| Flow Control | Yes | ↗ |
| Frame Description | Reinforced 4" (10.2 cm) square tubing | ↗ |
| Fuel Tank Capacity | 25 gal | ↗ |
| Fuel Type | Diesel | ↗ |
| Gross Horsepower (Maximum) | 74 hp | ↗ |
| Height | 79 in (201 cm) | ↗ |
| Hitch Type | Pin, pintle, 2 1/6" (1.6 cm) ball | ↗ |
| Length | 167 in (425 cm) | ↗ |
| Length - Tongue Extended | 234 in (594 cm) | ↗ |
| Length - Tongue In | 167 in (425 cm) | ↗ |
| Lower Gearbox | Straight bevel | ↗ |
| Make and Model | Deutz TD2.9L Tier 4 Final | ↗ |
| Manufacturer - Option One | Dexter | ↗ |
| Max Fuel Consumption | 4.6 gph | ↗ |
| Maximum Angle of Continuous Operation | 30 deg | ↗ |
| Number of Cylinders | 4 | ↗ |
| Number of Indexes | 2 | ↗ |
| Number of Pockets | 42 | ↗ |
| Number of Teeth | 42 | ↗ |
| Oil Capacity | 1.7 qt | ↗ |
| Oil Capacity - Lower Gearbox | 2.2 qt | ↗ |
| Oil Filter | Spin-on | ↗ |
| Oil Type | SAE 75W90 synthetic gear oil | ↗ |
| Oil Type - Lower Gearbox | SAE 75W90 synthetic gear oil | ↗ |
| Oil Volume with Filter | 10.6 qt | ↗ |
| Operator Vision Shield Description | Abrasion-resistant coated poly carbonate | ↗ |
| Preventive Maintenance | Optional | ↗ |
| Pump Flow at Maximum RPM | 3.2 gpm | ↗ |
| Radio Remote Control | None | ↗ |
| Recommended Oil | 15 W40 Deutz | ↗ |
| Recommended Oil Type | Vermeer HyPower 68 | ↗ |
| Reversible Pockets/Teeth | Yes | ↗ |
| Shutdown System | Low oil pressure, high engine coolant temp | ↗ |
| Sound Power | 108.0 dB(a) | ↗ |
| Sound Power - Engine Option Two | 112.3 dB(a) | ↗ |
Cada valor se rastrea hasta los datos publicados por el fabricante. ↗ abre la fuente.
Export for Heyquip
Populate your Heyquip store's product page with this model's specs, images, and cited documents.
¿Es su equipo? Verifique sus specs →