CAT CLASS: HQ-10302

Up to 8 in Concrete Scarifier and Planer

Up to 8 in concrete scarifiers remove hard coatings, adhesives, and trip hazards in a narrow working path suited to perimeter work, confined spaces, and access through standard doorways. This is the smallest class in the Concrete Scarifier and Planer ladder, positioned below the 14+ in size class. The compact cutting width makes this size the default choice for walls, columns, and areas where larger equipment cannot operate.

Modèles

Marques

Cat classes

Choisissez une classe de taille — la capacité et la portée varient selon la gamme.

Spécifications clés

Spécification	Plage typique	Signification
Cutting Width	Up to 8 in	Narrow path allows work along walls and through 36 in doorways.
Milling Depth	Adjustable, typically to 1/4 in	Removes coatings and addresses trip hazards without deep removal.
Cutting Mechanism	Rotating carbide-tipped cutters	Flails or drums fracture and remove surface material.
Dust Collection	Shroud with vacuum port	Requires companion vacuum for silica control during operation.

Comment choisir

Up to 8 in scarifiers are appropriate when working along walls, around columns, or in spaces where a wider cutting path cannot fit. Their narrow profile and maneuverability suit perimeter cleanup, doorway transitions, and confined-area coating removal. For open-floor production work or projects where speed is prioritized over access, the 14+ in Concrete Scarifier and Planer class offers a wider cutting path and higher material removal rates. Choose this size when access constraints dictate the working width, not when floor area is the primary challenge.

Ce que cette taille peut gérer

Removing epoxy coatings along warehouse walls and loading-dock edges
Scarifying trip hazards at doorway thresholds and transitions
Cleanup work around columns and structural penetrations
Coating removal in narrow aisles and between racking systems
Surface prep in corridors and confined mechanical rooms
Edge work where ride-on or larger walk-behind equipment cannot reach

Sécurité et opération

Dust shroud and HEPA-rated vacuum required for silica compliance during concrete work
Rotating cutters demand guarding and clearance from bystanders during operation
Kickback risk when encountering embedded metal or abrupt surface changes
Hearing protection necessary; carbide cutters on concrete generate high noise levels

Transport et logistique

Compact enough for transport in enclosed trailers or pickup beds
Walk-behind design; operators typically load via ramps or tailgate

Alimentation

Electric models require 115V or 230V single-phase power on site
Gasoline-engine versions available for outdoor or unpowered locations

Questions fréquentes

When does the narrow cutting width justify choosing this size over a 14+ in scarifier?

This size is appropriate when access width is the constraint—working along walls, through doorways, or around obstacles. For open-floor work, the wider class removes material faster and reduces project duration.

What depth of material can this size class typically remove in a single pass?

Most models adjust to approximately 1/4 in depth, suitable for coatings and minor surface correction. Deeper removal requires multiple passes or a larger, more aggressive machine.

Does this size replace a grinder for edge work?

Scarifiers remove material more aggressively than grinders but lack the precision for tight corners or delicate profiling. Both tools serve distinct functions in surface preparation workflows.

Équipements connexes

14+ in Concrete Scarifier and Planer 2

Parcourir par fabricant

Bomag 1

Sources

Chaque spécification est vérifiée par rapport aux données publiées par le fabricant, avec la source liée pour référence.

bomag.com ↗

Up to 8 in Concrete Scarifier and Planer

1 modèles · Chaque spécification citée à la source

Bomag BM 1300/35-2

Bomag · Cold Planer

Up to 8 in Concrete Scarifier and Planer

→